Insert a SIM card, battery, and memory card

Asha 503 Get started

Learn how to insert a battery and SIM and memory cards.

Important: Your device uses a mini-UICC SIM card, also known as a micro-SIM card. Use of incompatible SIM cards, or use of SIM card adapters, may damage the card or the device, and may corrupt data stored on the card.

Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.

  1. Press the release button at the back of the phone, and carefully lift and remove the back cover. With back of phone
facing you, push down on back cover release button and lift back cover
  2. If the battery is in the phone, lift it out.
  3. Open the SIM holder, and slide the SIM into the holder, contact area face down. Close the holder, and lock it into place. With back of phone facing
you, SIM holder is inside battery compartment. To unlock holder, push
lid to left, and lift lid. When putting SIM in holder, make sure missing
corner is closer to top left corner of phone. Close lid, and push
lid to right.
  4. Line up the battery contacts, and put the battery in.
  5. Push the memory card into the memory card slot until it locks into place. When inserting, make
sure narrow side of card goes in first and straight edge is closer
to bottom edge of phone.

    Tip: To remove the memory card, push it in until it's released, then pull it out.

    Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card.

  6. Replace the back cover.
  7. To switch on, press and hold the power key.

    Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached.