Find a visible, easily-accessible spot for your holder on the dashboard of your car.

Some treatments on the dashboard or dirt on the suction cup may result in a significantly less effective bond, so before you start, remove such treatments, and make sure that the cup is clean.

  1. Place the mounting plate in a good spot on the dashboard. Press down firmly and evenly.
  2. Make sure the mount locking lever is released, and position the holder on the mounting plate.
  3. Press down the holder, and snap the mount locking lever closed.

Remove the holder from the dashboard

  1. Push the mount locking lever inwards, and lift from the tab on the edge of the suction cup.

    Depending on the material of the dashboard, the mounting plate may leave a mark on the surface.