Insert the SIM card and battery

Safe removal. Always switch the device off and disconnect the charger before removing the battery.

Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card, a micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see figure) in this device. A micro-SIM card is smaller than the standard SIM card. This device does not support the use of micro-SIM cards and use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.A SIM card with a mini-UICC cutout has a cutout around the contact area of the card.

A SIM card may be already inserted in the device. If not, do the following:

  1. Remove the back cover.

    remove-cover.jpg
  2. Remove the battery, if inserted.

    remove-battery.jpg
  3. Slide the SIM card holder, to unlock it.

    sim-installation-1.jpg
  4. Lift the SIM card holder up.

    sim-installation-4.jpg
  5. Make sure the contact area of the SIM card is facing toward the device, and slide the SIM card into the SIM card holder.

    sim-installation-2.jpg
  6. Lower the SIM card holder into place. Slide the SIM card holder, to lock it.

  7. Line up the battery contacts, and insert the battery.

    insert-battery.jpg
  8. To replace the cover, direct the top locking catches toward their slots, and press down until the cover locks into place.

    replace-cover.jpg

If the SIM card is not properly in place, the device can only be used in the offline profile.