Select Menu > Ctrl. panel > Settings and Phone.
Select from the following:
Call - Define general call settings.
Call divert - Define your call forwarding settings. See Call forward.
Call barring - Define your call restricting settings. See Call restrictions.
Network - Adjust the network settings.
Select Menu > Ctrl. panel > Settings and Phone > Call.
Select from the following:
Send my caller ID - Display your phone number to the person you are calling.
Send my internet call ID - Display your internet call address to the person you are calling using an internet call. This setting is only available if you have defined internet call service settings.
Call waiting - Set the device to notify you of incoming calls while you are in a call (network service).
Internet call waiting - Set the device to notify you of a new incoming internet call while you are in a call. This setting is only available if you have defined internet call service settings.
Internet call alert - Select On to set your device to alert for incoming internet calls. If you select Off, you receive only a notification if you missed a call. This setting is only available if you have defined internet call service settings.
Reject call with message - Reject a call, and send a text message to the caller.
Message text - Write the standard text message that is sent when you reject a call.
Own video in recvd. call - Allow or deny video sending during a video call from your device.
Image in video call - Display a still image if video is not sent during a video call.
Automatic redial - Set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press the end key.
Show call duration - Display the length of a call during the call.
Summary after call - Display the length of a call after the call.
Speed dialling - Activate 1-touch dialing.
Anykey answer - Activate anykey answer.
Noise cancellation - Activate earpiece active noise cancellation.
Contact search - Activate contact search in the home screen.
Select Menu > Ctrl. panel > Settings and Phone > Network.
To select the network mode, select Network mode and Dual mode, UMTS, or GSM. In dual mode, the device switches automatically between networks.
Tip: Selecting UMTS enables faster data transfer, but may increase the demand on battery power and reduce the battery life. In regions close to both GSM and UMTS networks, selecting Dual mode may cause constant jumping between the two networks, which also increases the demand on battery power.
To select the operator, select Operator selection and Manual to select from available networks, or Automatic to set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular network (MCN), select Cell info display > On.