Click Here to Install Silverlight*
Hong KongChange|All Microsoft Sites
Microsoft
Microsoft Hong Kong Communities 
|What's On?|About Us|Downloads|Site Map|Contact Us
 

  6月 6 日「微軟線上專家對談」主題:Windows Server 2003 系統升級與遷移

 
     回「微軟線上專家對談」首頁

問題數

問題描述與解答

Q1: nt4.0可否直接升級2003有何需特別注意之處
A: 如果 Windows NT 的版本早於 4.0,則無法直接升級成 Windows Server 2003 系列產品。您必須先升級成 Windows NT 4.0 並套用 Service Pack 5,才能升級成 Windows Server 2003 系列產品
Q2: 2000升級2003,使用者帳號及使用者移轉上需如何做
A:

1. 執行此程序之前,建議您先在執行 Windows 2000 的所有網域控制站上套用 Service Pack 2 或更新的版本
2. 找出作為架構主機的伺服器以及作為基礎結構主機的伺服器 (兩者可能是同一部伺服器)
3. 備份架構主機。您也可以備份其他伺服器,作為升級準備動作的一部份,但請在進行下一個步驟之前才備份架構主機
4. 中斷架構主機與網路的連線,一直到完成本程序步驟 9 之後再重新建立
5. 在架構主機上,當 Windows 2000 正在執行時,插入 Windows Server 2003, Enterprise Edition 安裝 CD 到光碟機中。
6. 開啟命令提示字元,切換至光碟機,再切換至 CD 上的 \i386 資料夾。
7. 在架構主機上,於命令提示下鍵入 adprep /forestprep

8. 先前的命令在架構主機上執行完成後,請確認樹系的準備是否成功。可以進行此項目的步驟包括: 確認是否未出現任何錯誤訊息。 執行任何可用的網域控制站診斷工具,例如 Dcdiag。請記住,網域控制站中斷了與網路的連線之後,將會出現複寫錯誤。 開啟 [事件檢視器],並檢查系統記錄檔有無錯誤或非預期的事件
9. 評估您在前一步驟中所收集的資訊,再依其選擇: 若 adprep /forestprep 執行時未出現任何錯誤,請將架構主機重新連線到網路,繼續本程序的下一個步驟。 若 adprep /forestprep 執行時出現錯誤訊息,指示您採取其他步驟,請依其指示進行,然後再回到前一步驟的確認程序。 若 adprep /forestprep 無法順利執行,或者 Dcdiag 等診斷工具揭露了重大問題,請從備份還原架構主機,再執行必要的修正步驟,讓 adprep /forestprep 能順利執行
10. 若架構主機與基礎結構主機分屬兩部不同的電腦,請稍候片刻,讓 adprep /forestprep 將架構主機的變更複寫到基礎結構主機上。您至少要等候 15 分鐘,但若 架構主機與基礎結構主機位於不同的站台上,時間可能要更長 (半天至一天)。若試圖 在變更複寫完成之前執行基礎結構主機的網域準備工作,Adprep 將出現錯誤訊息,通 知您再等候一下
11. 在基礎結構主機上,當 Windows 2000 正在執行時,插入 Windows Server 2003, Enterprise Edition 安裝 CD 到光碟機中
12. 開啟命令提示字元,切換至光碟機,再切換至 CD 上的 \i386 資料夾
13. 在基礎結構主機上,鍵入 adprep /domainprep

14. 當先前命令在基礎結構主機上執行完成後,請確認網域的準備是否成功。可以進行 此項目的步驟包括: 確認是否未出現任何錯誤訊息。 執行任何可用的網域控制站診斷工具。 開啟 [事件檢視器],並檢查系統記錄檔有無錯誤或非預期的事件
15. 評估您在前一步驟中所收集的資訊,再依其選擇: 若 adprep /domainprep 執行時未出現任何錯誤,請繼續本程序的下一個步驟。 若 adprep /domainprep 執行時出現錯誤訊息,指示您採取額外的步驟,請依其指示進 行,然後再回到前一步驟的確認程序
16. 請稍候片刻,讓 adprep /domainprep 所做的變更從基礎結構主機複製到其他網域 控制站。請至少等待 15 分鐘,但若網域控制站位於遠端站台,時間可能要更長 (半天至一天)。若您在變更複寫完成之前,便開始替其他網域控制站升級,此時將出現一個快顯訊息,通知您再稍加等候

Q3: 如何利用ADMT自動遷移Service Account
A:

You may visit the following link to see the full detail.

How to Use Active Directory Migration Tool Version 2 to Migrate from Windows 2000 to Windows Server 2003 http://support.microsoft.com/default.aspx?scid=kb;en-us;326480

Q4: 怎麼做利用ADMT遷移MISEX01 Server至YF Domain
A: 1. 賦予ADMT執行者伺服器權限
2. CheckingExchange Mailbox 帳號權限設定 (於MISex01)
3. Exchange Directory遷移精靈必須權限設定
4. 執行ADMT Exchange Directory遷移精靈調整Exchange調限設定
Q5: 如果Exchange 伺服器想使用不同的連接埠,admt需要修改嗎
A:

在 UI 裡可以 port,但在 admt 裡不行

Q6: 如何Upgrade Windows 2000 Domain Controllers至server 2003
A:

請參看KB:

325379 How to Upgrade Windows 2000 Domain Controllers to Windows Server 2003 http://support.microsoft.com/?id=325379

Q7: NT4遷移至Windows Server 2003是否可保留該帳號密碼?聽說NetIQ可以做到
A: ADMT 2.0 即可做到 http://support.microsoft.com/?kbid=325851
Q8: 從2000升級2003時,出現"You must be an Administrator to run this application",但我已經登入為administrator了耶
A:

The PC you are going to upgrade, it is standalone server, member server or Domain Controller? And You are logging in as Local or domain Administrator? ADMT requires the following permissions to run properly: a.. Administrator rights in the source domain. b.. Administrator rights on each computer that you migrate. c.. Administrator rights on each computer on which you translate security.

You may visit more information in the following link.

http://support.microsoft.com/default.aspx?scid=kb;en-us;326480

Q9: I want to expand the boot partition during a Windows Server 2003 upgrade
A:

可以的,具體步驟清參看以下的KB

325857 HOW TO: Expand the Boot Partition During a Windows Server 2003 Upgrade http://support.microsoft.com/?id=325857

Q10: 從UNIX and Java applications遷移至2003,請問各位專家有無好建議
A:

您可以使用Windows Service For Unix (SFU) 3.0 來遷移unix程序 到windows 2000/2003.

http://www.microsoft.com/windows2000/migrate/unix/

Q11: 2000升級至2003,印表機使用者及群組名稱需重新setup嗎
A:

I don't think that you may need to re-setup, as the Windows 2000 and Windows Server 2003 Printing Architecture are similar.

You may get the tech doc in the following link about printing service in Win2003. http://www.microsoft.com/windowsserver2003/techinfo/overview/printservmigration.mspx

Q12: 2003dns是不是要設定成動態
A: If you are going to have Win2003 AD Domain, You must config one of your DNS to Dynamic DNS.
Q13: 列印裝置記憶體,想安排工作的優先順序,需至2003的那個功能選項
A:

可否解釋一下何謂 "列印裝置記憶體?" 以及"安排工作的優先順序" 與 ""列印裝置記憶體?" 之間有何關係? 以及,您想達到什麼目的?我們在收到您的資訊後,將儘快處理

Q14: 2000直接升級2003需注意之處
A: 基本上您可直接升級至2003,但若不放心的話可先檢查一下相容性
Q15: NetBIOS 名稱解析不適用於ADMT 電腦及「密碼匯出伺服器 (PES)」怎麼辦
A: 請參考http://support.microsoft.com/?kbid=325851
Q16: 如何Using Active Directory Migration Tool Version 2 to Migrate from Windows 2000 to Windows Server 2003
A: 先建立雙向的信任關係,並且將兩邊的Administrator加入到對方的Local Administrators Group中!再至目的地網域中安裝ADMT2.0!
Q17: 如何得到Active Directory Migration Tool Version 2
A: Win2003 Server的光碟片中I386\ADMT
Q18: How to create an Active Directory server in windows server 2003
A:

You may run DCPromo or start the setup wizard from the Config your server under Admin Tools.

More information on AD in win2003, please visit the following link
http://www.microsoft.com/windowsserver2003/techinfo/overview/activedirectory.mspx

Q19: 原先在NT4.0網域中的BPC安裝成EXCHANGE5.5 MAIL SERVER ,能否適用於WIN2003的新網域,並且能夠正常設定E-MAIL ADDRESS的帳號等等嗎?如果不能,該怎麼作
A: You may visit the following link, XGEN: Exchange 2000 Server and Exchange Server 5.5 Compatibility with Windows Server 2003 http://support.microsoft.com/default.aspx?scid=kb;en-us;810591
Q20: 升級2003和遷移2003有什麼不同呢
A:

大致來看是這樣的 : 升級:大多數指的是"直接"在您目前的作業系統上昇級

遷移:除了上述方式之外 ,可能還包含, 重新安裝一個系統,然後將原來的所有東西, 包含帳號, SID, "搬移" 到新的系統上,通常還希望保留原來的使用方式 , 也就是不影響一般使用者的操作

Q21: 如何從NetWare及NDS移植到Windows Server 2003 與 Active Directory
A:

試參考:ID: 301542.KB. HOW TO: Migrate Users from NetWare to Windows 2003 with the MSDSS Tools

http://support.microsoft.com/?id=301542

Q22: 如何在掌上型PC安裝RDP用戶端
A:

Pocket PC. Downloads - Terminal Services http://www.microsoft.com/mobile/pocketpc/downloads/terminalservices/default.asp

Q23: 升級至2003前,需要有那些前置動作,例如需不需要備份之類的
A: 請參考 http://www.microsoft.com/taiwan/support/content/7802.htm
Q24: 建構win server 2003上,之前consultant建議最少多加一台wins 伺服器容錯,請問各位專家們幾台wins較為適合
A:

參考: http://www.microsoft.com/windows2000/en/advanced/help/default.asp?url=/windows2000/en/advanced/help/sag_WINS_imp_PlanningNetworks.htm

Planning how many WINS servers to use On a smaller network, a single WINS server can adequately service up to 10,000 clients for NetBIOS name resolution requests. To provide additional fault tolerance, you can configure a second computer running Windows 2000 Server as a secondary (or backup) WINS server for clients. If you use only two WINS servers, you can easily set them up as replication partners of each other. For simple replication between two servers, one server should be set as a pull partner and the other as a push partner. Replication can be either manual or automatic, which you can configure by selecting the Enable automatic partner configuration check box on the Advanced tab of the Replication Partner Properties dialog box.

A larger network sometimes requires more WINS servers for several reasons including, most importantly, the number of client connections per server. The number of users that each WINS server can support varies with usage patterns, data storage, and the processing capabilities of the WINS server computer. Some enterprise network environments require more robust hardware to handle WINS activity, so you might benefit from upgrading the server computer.

When planning your servers, remember that each WINS server can simultaneously handle hundreds of registrations and queries per second. The WINS development and testing team compiled the following statistics as a profile of WINS performance during preliminary testing of Windows 2000 Server:

Average registrations/second 300 Average queries/second 350

These measurements were based on a server computer running WINS with no other additional services running and installed on currently available hardware. The list of specific hardware used includes the following: a single Intel Pentium II 350 MHz processor, 128 MB of RAM, and a standard IDE hard drive, which was used to store the WINS database. As a point of reference, WINS records data exchanged between servers and clients is typically small. On average, WINS records are about 40 bytes in size.

A conservative recommendation for large networks is to install one WINS server and a backup server for every 10,000 computers on the network. This reflects the previously suggested baseline performance and provides for large-scale power outages that could cause many WINS computers to restart simultaneously. Capacity is dependent upon server and network resources. Processor speed, available RAM, database storage space, and network resources can have a significant impact.

Two factors can enhance WINS server performance:

a.. Using two installed processors on the computer running WINS. This can increase performance by almost 25 percent. b.. Using a dedicated high-performance disk drive, separate from the system drive, for WINS replication.

After you establish WINS servers on your intranet, you can adjust the renew interval, which is the time between a WINS client name registration and name renewal. By using this setting to reduce the numbers of registrations, you can tune server response time. The Renew interval is set in the WINS server properties dialog box.

Q25:

目前已知Windows Server 2003 的版本有..

1:Standard Edition

2:Enterprise Edition

3:Datacenter Edition

4:Web Edition

以現在的企業而言(整體電腦數大約為100臺)...

使用...Enterprise Edition..是否為最佳的版本..?

又如要以2003為主機..最佳的配合分式為(有就是以現有的OS為主的話)?

A: 整體電腦數大約為100臺,建議您使用Standard Server。如要以 2003為主機,最佳的配合分式為使用Windows 2000 Professional和 Windows XP Professional為client
Q26: 從2000 UPGRADE WIN SERVER 2003使用者的PASSWORD可否保留呢
A: 可以保留
Q27:         安裝精靈顯示一個對話方塊提示發生「錯誤2343」,就關閉了, 請問是什麼原因
A:

解決方法有:

將 Notes.ini 重新命名 可以暫時將 Notes.ini 檔重新命名,以避免發生錯誤訊息。 在 Microsoft Windows 95、Microsoft Windows 98 或 Microsoft Windows Millennium Edition (Me) 中,這個檔案可能位於下列資 料夾中: %systemroot%\system

其中 %systemroot% 是您安裝系統所在的磁碟機和路徑。

在 Microsoft Windows NT 4.0、Microsoft Windows 2000 或 Microsoft Windows 2000 Professional 中,這個檔案可能位在下 列資料夾中 %systemroot%\system32

其中 %systemroot% 是您安裝系統所在的磁碟機和路徑。

Q28: 在使用Win Server 2003 的 IE 執行ASP.NET程式時 ,發現有不正常的情形:ImageButton和LinkButton都失效了。但是用其他電腦的IE(2000 Server和98 SE)執行ASP.NET程式時,都很正常。 請問:是不是Win Server 2003的IE或是那兒要做什麼設定嗎
A: you may try to ask this question in ASP.NET newsgroup. Actually, .NET Framework in win2003 is version 1.1, is your application build by .net Framework version 1.0
Q29: 設定暫存目錄的位置在那兒因為不想將使用者暫存檔放在預設處,可是在使用者<內容>對話方塊又無法設定,請問那兒才能設定
A:

您所謂的 "使用者暫存檔" 可否告知及定義,我們在收到您的資訊後,將儘快處理

Q30: 2003有內附TSCAL TERMINAL SERVICES INTERNET CONNECTOR LICENSE 嗎
A:

Win2003 has only 3 type of licensing, The name you ask is only for win2000. But you may still use the same licensing in win2000 to connect to win2003.
1. Windows Server 2003 Terminal Server Device Client Access License.

2. Windows Server 2003 Terminal Server User Client Access License.

3. Windows Server 2003 Terminal Server External Connector.

You may read more documentation from the following link,
http://www.microsoft.com/windowsserver2003/techinfo/overview/termservlic.mspx

Q31: 如果用戶端一直收到終端機伺服器太忙碌的訊息,應該要 check那兒有問題
A:

ID: 260746.KB.EN-US

Terminal Services Client May Not Connect with "Server Too Busy" Error WGID:324

Q32: 從2000 UPGRADE WIN SERVER 2003使用者的PASSWORD可否保留呢
A: 如果您只是在原來的Windows 2000升級到Windows 2003,可以保留
Q33: would you pls tell me how to manage the Active Directory Schema in windows server 2003 enterprise edition tks so much!
A:

Please refer to the following web link:

326310 HOW TO: Manage the Active Directory Schema in Windows Server 2003 <http://support.microsoft.com/?id=326310>

Q34: 使用同一個AD,從NT 4.0 升級 2003,如何使用者移轉,何處安裝所需程式呢
A:

There is a tools called, Active Directory Migration Tools to migrating your existing user from NT4 to win2003. More information and download link in the following,

http://support.microsoft.com/default.aspx?scid=kb;en-us;325851

Q35: 如何安全地將NT4.0 Domain升級成為 w2k domain,並成為一個 sub-domain
A: You just do your upgrade plan, be sure you enter/select the right option in the AD installation wizard. You may choose "new domain under existig domain"
Q36: ADMT的系統需求
A:

您可以安裝ADMT在任何運行Windows 2000以後的機器上,包括:

- Microsoft Windows 2000 Professional

- Microsoft Windows 2000 Server

- Microsoft Windows XP Professional

- Microsoft Windows Server 2003

你安裝ADMTv2的機器一定要是 來源或目的域的成員

Q37: 是不是伺服器內DATA加密等級愈高,工作階段效能就愈差,如何取得平衡點呢
A: 只針對需要的資料(機密性交的資料)加密.
Q38: 如何利用手動方式設定Service Account
A: 能否請您提供更多相關資訊,我們在收到您的資訊後,將儘快處理
Q39: WIN2003使用者的主目錄HOME DIRECTORY終端機伺服的那個資料夾呢
A:

您的描述不是很清楚 ,但我想您可以參考: ID: 816313

HOW TO: Assign a Home Folder To a User

Q40: 如何賦予ADMT執行者伺服器權限
A:

to run the ADMT, you must be one of the following,

a.. Domain Administrator rights in the target domain. a.. A member of the Administrators group in the source domain. a.. Administrator rights on each computer that you migrate. a.. Administrator rights on each computer on which you translate security.

So you may to add the user account into Domain/administrators group.

more information in the following link, http://support.microsoft.com/default.aspx?scid=kb;en-us;325851

Q41: 如何將 Microsoft Windows NT 4.0 主要網域控制站 (PDC), 升級為 WIN SERVER 2003 網域控制站
A:

1) make sure your PDC is with SP5 or later, 2) choose which edition of win2003. 3) system requirements 4) make a good plan on your AD structure. ........etc You may download the full documentation in the following link,

http://www.microsoft.com/windowsserver2003/evaluation/whyupgrade/nt4/nt4domtoad.mspx This white paper provides an overview of the process for upgrading or migrating to the Windows Server 2003 Active DirectoryR service, outlines some of the basic decisions to be made during the process, and includes a summary of Active Directory best practices.

Q42: 如何在2003中取得關於使用者豋入多久以及伺服器中斷連線的工作階段閒置多久的資料
A:

開啟工作管理員,選取使用者那個頁面,就可以看到使用者的相關訊息

開啟DOS視窗,輸入:net config server 可以看到伺服器相關的參數設定

Q43: 2003可透過遠端安裝或升級嗎
A: 可以。您可以使用網路安裝但不可以使用RIS安裝,因為RIS只可以安裝Windows 2000/XP professional
Q44: 在2003,如何安裝DHCP伺服器
A: 控制台\新增移除程式\新增移除windows元件\networking Services\DHCP打勾即可安裝 ,若你是在Domain中還必需在安裝完時按右鍵執行授權才能正常Work
Q45: windows-based終端機是做什麼
A: By having the Terminal Service, 1) you may do the remote administrative action remotely. 2) You may run application that is for win2003 from a non-win2003 client. (specially when your hardware is not powerful to install win2003/winXP.)
Q46: WIN2000,工作階段是活動中時,螢幕上影像是每秒更新20秒,此時user登入工作階段,但停止傳送滑鼠與鍵盤輸入動作給伺服器, 請問win2003更新時間有比較短嗎
A: 請問您是指在 Terminal Server 下嗎?我們在收到您的資訊後,將儘快處理
Q47: 在win server 2003如何建立PPPoE連線
A:

基本上使用方式和XP相同
開始---->所有程式---->附屬應用程式---->通訊----------> 新增連線精靈------>連線到網際網路-------> 選擇手動設定我的連線-----> 計時制ADSL 請選 使用需要使用者名稱和密碼的寬頻連線來連線------->輸入ISP名稱------------>輸入使用者名稱---->輸入密碼-------> 輸入確認密碼------>完成設定

Q48: 升級出現"Bugcheck 0x000000C2 (BAD_POOL_CALLER)"無法進行,請問怎辦
A: 817409 "BAD_POOL_CALLER" Error Message When Upgrading to Windows 2003 Server http://support.microsoft.com/?id=817409
Q49: 為了保障網路資源安全性,如何將印表機排除在server上瀏覽清單
A:

HOW TO: Hide a Windows 2000-Based Computer from the Browser List

http://support.microsoft.com/?id=321710

Q50: 網域控制站可以設成wins伺服器嗎
A: 可以!不會有衝突
Q51: wins複寫結構如何避免不會有迴圈存在
A: 在設定複寫對時,注意設定的順序,並記錄複寫的wins群組
Q52: 將nt4.0或是win 2000 server 移至2003,請建議有那些 migration strategy
A: 如果網域架構不變的話那麼你可以採用Upgard方,式但如果要改變現有網域架構則可以 採用migrade方式! 但一般建議採用Upgarde會比較好及方便!
Q53: 原先的WEB SERVER是NT4.0+IIS4.0+Site Server3.,可否升級至WIN2003的WEB SERVER
A: 很抱歉, Site Server 3.0 和Site Server 3.0 Commerce Edition 不支援在Windows 2003上使用
Q54: 執行 ADMT 所需的權限為何
A: 必需為雙方網域中的Administrator權限
Q55: ADMT 版本 2.0 中的有何新功能
A: ADMTv2 一個新功能是可以遷移用戶的密碼
Q56: 從2000升級2003上,密碼可直接遷移嗎 還是需重新設定
A: 沒有問題,2000直接升到2003密碼會直接遷移,無須手動設定
Q57: 我有一台DC並非FSMO,但是有安裝Exchange2000 請問這一台如果升級成win2003,是否會影響Exchange2000呢
A: 不行!Exchange2000無法安裝至Win2003上,你應該要等Exchange2003上市後先昇級Exchange2000再昇級Win2000至Win2003
Q58: 如何尋找遷移記錄檔
A: 你可以利用ADMT的產生報表功能來做
Q59: 如何在樹系間進行遷移
A:

請使用 ADMT ,並預先在來源端及目的端建立信任關係.

參考: http://www.microsoft.com/downloads/details.aspx?FamilyID=788975b1-5849-4707-9817-8c9773c25c6c&DisplayLang=en

Q60: 服務帳戶遷移之後,ADMT 密碼的加密版本會儲存於何處呢
A:

請參考這邊 http://www.microsoft.com/Taiwan/technet/prodtechnol/windowsnetserver/evaluate/cpp/reskit/adsec/part1/rkpdsbfo.htm

Q61: 遷移帳戶名稱時好像聽說有些不能用的字元,請問那兒參考有文件
A:

我稍微查了一下 ,並沒有發現有此類文件

您可否告知在您曾在做遷移帳戶名稱時 ,使用了哪些字元而導致問題

Q62: 遷移時出現的錯誤訊息,"W1:7352 無法新增至 CN=Executives。RC=80005008。一或多個輸入參數無效"請問怎麼辦
A: 請嘗試 ADMT 2.0 http://www.microsoft.com/downloads/details.aspx?FamilyID=788975b1-5849-4707-9817-8c9773c25c6c&DisplayLang=en
Q63: 信任遷移在,精靈中的最後一個下一步按鈕無法使用,請問如何解決
A: 請嘗試 ADMT 2.0 http://www.microsoft.com/downloads/details.aspx?FamilyID=788975b1-5849-4707-9817-8c9773c25c6c&DisplayLang=en
Q64: 若要遷移至2003,有無最基本的硬碟要求,可有那些評估 criteria
A:

您可參考一下 http://www.microsoft.com/taiwan/support/content/7800.htm

Windows Server 2003系統需求為何的部份

Q65: 遷移記錄檔中:"ERR2:7173 無法列舉本機機器上的印表機, rc=1722 RPC 伺服器無法使用。"請問是什麼意思、如何造成及解決
A: 我查看了以前的案子. 這看起來像是 40 個印表機的限制. 您可能安裝了過40 台印表機. 是嗎
Q66: 什麼是 ADMT
A:

Active Directory Migration Tool (ADMT)

功能: 使用Active Directory Migration Tool可以在以下幾種環境下遷移 使用者帳號,群組,電腦帳戶
1.Windows NT 4.0 and earlier domains to Windows 2000 domains (interforest).

2.Between Windows 2000 domains in different forests (interforest).

3.Between Windows 2000 domains in the same forest (intraforest).

可以參閱這裡.. http://www.microsoft.com/taiwan/support/content/6492.htm#AD MT

Q67: 如何從NT server 4.0 domains遷移至windows server 2003 active directory
A: 請使用Upgrade的方式
1.先安裝一台新的WinNT成為BDC然後進行同步
2.將原先PDC離線,將新的BDC昇級成PDC
3.將光碟放入執行昇級
Q68: 如何從 nt 4.0 cluster 升級至 2003 cluster
A:

參考: Note: There is no support for rolling upgrades from a Microsoft Windows NT 4.0 cluster to a Windows Server 2003 cluster. An upgrade from Windows NT 4.0 is supported, but the cluster must be taken offline during the upgrade.

For additional information, click the following article number to view the article in the Microsoft Knowledge Base:

KBLink:301538.KB.EN-US: How to Upgrade a Microsoft Windows NT 4.0 Cluster to Windows Server 2003

Q69: 樹系內遷移,會複製通用群組沒有 SIDHistory,為什麼
A:

試參考:ID: 322970.KB.

How to Troubleshoot Inter-Forest sIDHistory Migration with ADMTv2

下載:

http://www.microsoft.com/downloads/details.aspx?FamilyID=788975b1-5849-4707-9817-8c9773c25c6c&DisplayLang=en

Q70: Windows Server 2003 AD 網域上有多台RIS Server,如何設定用戶端指定到那一台RIS Server上的映像檔安裝
A:

您可以在RIS Server上設置,使得RIS Server將RIS service只提供給相應的client,具體步驟如下 1. Locate the container in the Active Directory service in which you want your client accounts to be created.

2. Right-click the container, click New, and then click Computer. The New Object-Computer dialog box is displayed.

3. Enter the computer name and authorize domain-join permissions for the user or security group that contains the user who is going to use the computer that this computer account represents.

4. In the next dialog box, you are prompted for either the globally unique identifier (GUID) or universally unique identifier (UUID) of the computer itself and whether you intend to use this computer as a managed (Remote OS Installation-enabled) client. Enter either the GUID or UUID, and then click to select the "This is a managed computer" check box.

298750 HOW TO: Set Up and Configure Remote Installation Services in Windows 2000 http://support.microsoft.com/?id=298750

Q71: 2003那些版本可以升級呢
A: http://www.microsoft.com/taiwan/support/content/7802.htm
Q72: 我們如何抉擇要升級或重新安裝呢
A: 如果你的現有架構已經有問題且不穩定的話則不應該採用昇級Upgrade方式,因為昇級並不會將原有問題解決!此時你應該採用Migrade遷移的方式,先全新建立一個 Win2003Domain再與原網域做雙向信任後,再利用WS03光碟片中的ADMT工具來做帳號密碼的遷移即可
Q73: win server 2003支援那些升級路徑
A:

1) Upgrade from NT4 with SP5 or later. 2) upgrade from Win2000.

more information in the following link, http://www.microsoft.com/windowsserver2003/upgrading/default.mspx

Q74: 升級至2003後,原本win98內的印表機就看不到"there are drivers that are installed that may be incompatible with either Windows Server 2003, Standard Edition or Windows Server 2003, Enterprise Edition."
A: 請從Printers\Win9x 檔夾裏面重新安裝印表機的驅動程式: 315285 Windows 95、Windows 98、Windows 98 Second Edition and Windows Me Print http://support.microsoft.com/?id=315285
Q75: 從 nt 4.0 升級至 2003,出現的字樣"Certificate Server 1.0 cannot be upgraded directly from Windows NT 4.0 to Windows Server 2003.If you continue, your Certificate Server settings may not be saved, and Certificate Server may be automatically uninstalled. If you upgrade first to Windows 2000 and then upgrade to Windows Server 2003, all your Certificate Server settings will be preserved.For more information about Windows Server 2003 Certificate Services, see the Microsoft Web site."怎麼辦
A: 很抱歉,您無法將Windows NT Certificate Server直接升級到 Windows 2003。您如果要保留Certificate Server的設置和資料, 您只可以先升級到Windows 2000,然後升級到Windows 2003
Q76: Windows 2003 Client的 DHCP 動態 DNS 登錄無法運作, 請問有何解決方法
A:

您是指您把 2003 做為 client 而無法在 win2k 的dns 上登錄嗎?

試試手動登錄 ipconfig /registerdns 並檢查 DNS 上的設置是否正確,以及client 是否正確指向該 dns 以及該 client 的尾碼是否已正確設定.

Q77: Windows 2000 &Windows 2003 Advanced Server有那些不同點
A:

Application service, Clustering Node, IIS6, security support, Storage Management.....etc. It is hard to tell you all, You may try to compare with the feature on Win2000 Advanced server and win2003 enterprise server.

You may read in the following to get "what is new in win2003" http://www.microsoft.com/windowsserver2003/evaluation/overview/technologies/ default.mspx

Q78: nt STATION system,在「MS-DOS命令提示字元」下無法輸入中 文,應如何處理
A: 請問您是指一直以來都不行呢? 還是安裝了什麼軟體,做了什麼操作後才產生此問題
Q79: 如何manage the AD(Application Directory) Partition and Replicas in Windows Server 2003
A: 參考:ID: 322669.KB HOW TO: Manage the Application Directory Partition and Replicas in
Q80: 在做2003升級時如何Expand the Boot Partition
A:

可以的,不過您要使用無人值守安裝。具體步驟清參看以下的KB

325857 HOW TO: Expand the Boot Partition During a Windows Server 2003 Upgrade http://support.microsoft.com/?id=325857

Q81: 如何安裝ad Administrative Tools Windows XP Professional 在 Windows Server 2003
A: 安裝WS03 CD中的AdminPak.mis
Q82: 想要從Macintosh Server to Windows Server 2003,有何注意事項
A:

很抱歉,不可以升級Macintosh Server到Windows Server 2003

Q83: 如何安裝ADMT從nt遷移至2003
A:

to run the ADMT, you must be one of the following,

a.. Domain Administrator rights in the target domain. a.. A member of the Administrators group in the source domain. a.. Administrator rights on each computer that you migrate. a.. Administrator rights on each computer on which you translate security.

So you may to add the user account into Domain/administrators group.

more information in the following link, http://support.microsoft.com/default.aspx?scid=kb;en-us;325851

Q84: 公司只有5人,請問需要安裝Windows Server 2003嗎
A: See if you need any server service or not. If you only need IIS/FTP/Telnet which WinXP professional can give you, then you may think about just having the WORKGROUP by winXP Professional. With less than 10 stations you may just use WORKGroup than Domain. However, if you need some service like, Exchange server, SQL Server.....etc, you may think about having one Win2003 server.
Q85: 重新安裝比較好還是直接升級比較好
A: 要視你的系統穩定度而定,如果目前已不穩定則建議用遷移方式
Q86: 如何Raise Domain and Forest Functional Levels in Windows Server 2003
A:

參考: ID: 322692.

HOW TO: Raise Domain and Forest Functional Levels in Windows Server 2003

Q87: 安裝完windows server 2003後,原先的印表機就不能用了,請問怎麼辦
A: 您可刪除print重新安裝即可
Q88: 新舊server替換,如何將舊server的使用者匯至新server主機,可不可以省略重新setup重新input user和password的步驟呢
A: 請問是用Windwos2000當網域控制站嗎?若是的話,可直接將新主機加入網域並升級為網域控制站 ,待同步完成再決定是否要將原網域控制站留下,若是NT4的話就不是用這種方法,另外這方法僅適用單一網域較佳
Q89: Norton System Works 2002 可不可以正常在Windows Server 上執行呢有人用過嗎
A: 會有問題,請不要輕易 嘗試,畢境NSW並不是專為Server所設計
Q90:

Could anyone tell me how to solve this problem.

The event viewer of my Windows 2000 advanced server has this error message:

The active directory cannot find the remote procedure call (rpc) protocol sequence number. Active directory cannot respond to rpc request.

A: Can you tell me about the event ID number, maybe I can find the problem from the KB, or if your have firewall, please tell me.
 

©2014 Microsoft Corporation. All rights reserved. Contact Us |Terms of Use |Trademarks |Privacy Statement