|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Press F5 and then type 214 and press enter. Does slide #214 display? If yes,
then go to Slide Sorter view. Do slides 214 thru 224 have a gray diagonal line
through the slide number at the lower left corner of each slide? If so that
means that you have them set to "Hide Slide" which causes them to not display
normally. Select the slides and go to the Slide Show menu and deselect the Hide
Slide option and then test your presentation again.
"Par" <Par@discussions.microsoft.com> wrote in message
news:1FFEC3F1-6373-4971-B2D7-08539534A01A@microsoft.com...
> Thanks for fast answer:
> There is only plain text on the slide. I try to place diffrent slides (put
> slide 1 to 10 after slide 213) but slide 213 act as the end anyhow.
> The method I use is click for all slides, an the transition is "come up", no
> specials.
> When I click on slide 214 or higher, and chose to start the slideshow, it
> starts on page one.
> Thanks
>
> Sonia skrev:
>
> > There is no limit to the number of slides per se. More likely there is a
> > setting or object on slide 213 or 214 that is causing your problem. What
are
> > the transition settings for each? What is on each slide? When on slide 213
in
> > slide show mode, can you type 214 and press enter and go to slide #214? Are
> > slides 214 thru 224 "hidden" by chance?
> > --
> >
> > Sonia Coleman
> > Microsoft PowerPoint MVP Team
> > Autorun Software, Templates and Tutorials
> >
> > "Par" <Par@discussions.microsoft.com> wrote in message
> > news:2754DE82-FA34-4F76-8CA3-585638BA6BB8@microsoft.com...
> > > Hi, my presentation contain 224 slides, but the show always stop after
slide
> > > number 213. i cannot show any slides after 213 as a view. Is there any
limit,
> > > og did I miss a a setting. Thanks for help
> > > --
> > > Per
> >
> >
> >
|
| |
|
| |
Was this post helpful to you? |
|
|
|
|
|
|
|
 Reply |
| |
 |
|
 Top |
|
|
|
|
|
|
|
|
|
| |
Hi again
If I press F5 and type pagenumber I can only se pages between 1 and 213. If
I type eg. page 220 then page 213 is visible. There is noe grey line between
214 and 224 - they're not hidden.
I copy the file to one other computer, but the problem still exist.
Regards
Per
Sonia skrev:
> Press F5 and then type 214 and press enter. Does slide #214 display? If yes,
> then go to Slide Sorter view. Do slides 214 thru 224 have a gray diagonal line
> through the slide number at the lower left corner of each slide? If so that
> means that you have them set to "Hide Slide" which causes them to not display
> normally. Select the slides and go to the Slide Show menu and deselect the Hide
> Slide option and then test your presentation again.
>
>
> "Par" <Par@discussions.microsoft.com> wrote in message
> news:1FFEC3F1-6373-4971-B2D7-08539534A01A@microsoft.com...
> > Thanks for fast answer:
> > There is only plain text on the slide. I try to place diffrent slides (put
> > slide 1 to 10 after slide 213) but slide 213 act as the end anyhow.
> > The method I use is click for all slides, an the transition is "come up", no
> > specials.
> > When I click on slide 214 or higher, and chose to start the slideshow, it
> > starts on page one.
> > Thanks
> >
> > Sonia skrev:
> >
> > > There is no limit to the number of slides per se. More likely there is a
> > > setting or object on slide 213 or 214 that is causing your problem. What
> are
> > > the transition settings for each? What is on each slide? When on slide 213
> in
> > > slide show mode, can you type 214 and press enter and go to slide #214? Are
> > > slides 214 thru 224 "hidden" by chance?
> > > --
> > >
> > > Sonia Coleman
> > > Microsoft PowerPoint MVP Team
> > > Autorun Software, Templates and Tutorials
> > >
> > > "Par" <Par@discussions.microsoft.com> wrote in message
> > > news:2754DE82-FA34-4F76-8CA3-585638BA6BB8@microsoft.com...
> > > > Hi, my presentation contain 224 slides, but the show always stop after
> slide
> > > > number 213. i cannot show any slides after 213 as a view. Is there any
> limit,
> > > > og did I miss a a setting. Thanks for help
> > > > --
> > > > Per
> > >
> > >
> > >
>
>
> |
| |
|
| |
Was this post helpful to you? |
|
|
|
|
|
|
|
Reply |
| |
|
|
Top |
|
|
|
|
|
|
|
| |
 Answer |
|
| |
I forgot to ask you the obvious question. If you go to Slide Show > Set Up
Show, under Show slides do you have it set to "from 1 to 213"? It sounds like
that is the problem.
"Par" <Par@discussions.microsoft.com> wrote in message
news:9555436B-1D3B-4CFA-BFE8-C28B14F315BD@microsoft.com...
> Hi again
> If I press F5 and type pagenumber I can only se pages between 1 and 213. If
> I type eg. page 220 then page 213 is visible. There is noe grey line between
> 214 and 224 - they're not hidden.
> I copy the file to one other computer, but the problem still exist.
> Regards
> Per
>
> Sonia skrev:
>
> > Press F5 and then type 214 and press enter. Does slide #214 display? If
yes,
> > then go to Slide Sorter view. Do slides 214 thru 224 have a gray diagonal
line
> > through the slide number at the lower left corner of each slide? If so that
> > means that you have them set to "Hide Slide" which causes them to not
display
> > normally. Select the slides and go to the Slide Show menu and deselect the
Hide
> > Slide option and then test your presentation again.
> >
> >
> > "Par" <Par@discussions.microsoft.com> wrote in message
> > news:1FFEC3F1-6373-4971-B2D7-08539534A01A@microsoft.com...
> > > Thanks for fast answer:
> > > There is only plain text on the slide. I try to place diffrent slides (put
> > > slide 1 to 10 after slide 213) but slide 213 act as the end anyhow.
> > > The method I use is click for all slides, an the transition is "come up",
no
> > > specials.
> > > When I click on slide 214 or higher, and chose to start the slideshow, it
> > > starts on page one.
> > > Thanks
> > >
> > > Sonia skrev:
> > >
> > > > There is no limit to the number of slides per se. More likely there is
a
> > > > setting or object on slide 213 or 214 that is causing your problem.
What
> > are
> > > > the transition settings for each? What is on each slide? When on slide
213
> > in
> > > > slide show mode, can you type 214 and press enter and go to slide #214?
Are
> > > > slides 214 thru 224 "hidden" by chance?
> > > > --
> > > >
> > > > Sonia Coleman
> > > > Microsoft PowerPoint MVP Team
> > > > Autorun Software, Templates and Tutorials
> > > >
> > > > "Par" <Par@discussions.microsoft.com> wrote in message
> > > > news:2754DE82-FA34-4F76-8CA3-585638BA6BB8@microsoft.com...
> > > > > Hi, my presentation contain 224 slides, but the show always stop after
> > slide
> > > > > number 213. i cannot show any slides after 213 as a view. Is there any
> > limit,
> > > > > og did I miss a a setting. Thanks for help
> > > > > --
> > > > > Per
> > > >
> > > >
> > > >
> >
> >
> >
|
| |
|
| |
Was this post helpful to you? |
|
|
|
|
|
|
|
Reply |
| |
|
|
Top |
|
|
|
|
|
|
|
|
|
| |
Yeah, I did find it 15 minutes ago, sorry, and thanks for all help you gave.
The problem is history.
Sonia skrev:
> I forgot to ask you the obvious question. If you go to Slide Show > Set Up
> Show, under Show slides do you have it set to "from 1 to 213"? It sounds like
> that is the problem.
>
> "Par" <Par@discussions.microsoft.com> wrote in message
> news:9555436B-1D3B-4CFA-BFE8-C28B14F315BD@microsoft.com...
> > Hi again
> > If I press F5 and type pagenumber I can only se pages between 1 and 213. If
> > I type eg. page 220 then page 213 is visible. There is noe grey line between
> > 214 and 224 - they're not hidden.
> > I copy the file to one other computer, but the problem still exist.
> > Regards
> > Per
> >
> > Sonia skrev:
> >
> > > Press F5 and then type 214 and press enter. Does slide #214 display? If
> yes,
> > > then go to Slide Sorter view. Do slides 214 thru 224 have a gray diagonal
> line
> > > through the slide number at the lower left corner of each slide? If so that
> > > means that you have them set to "Hide Slide" which causes them to not
> display
> > > normally. Select the slides and go to the Slide Show menu and deselect the
> Hide
> > > Slide option and then test your presentation again.
> > >
> > >
> > > "Par" <Par@discussions.microsoft.com> wrote in message
> > > news:1FFEC3F1-6373-4971-B2D7-08539534A01A@microsoft.com...
> > > > Thanks for fast answer:
> > > > There is only plain text on the slide. I try to place diffrent slides (put
> > > > slide 1 to 10 after slide 213) but slide 213 act as the end anyhow.
> > > > The method I use is click for all slides, an the transition is "come up",
> no
> > > > specials.
> > > > When I click on slide 214 or higher, and chose to start the slideshow, it
> > > > starts on page one.
> > > > Thanks
> > > >
> > > > Sonia skrev:
> > > >
> > > > > There is no limit to the number of slides per se. More likely there is
> a
> > > > > setting or object on slide 213 or 214 that is causing your problem.
> What
> > > are
> > > > > the transition settings for each? What is on each slide? When on slide
> 213
> > > in
> > > > > slide show mode, can you type 214 and press enter and go to slide #214?
> Are
> > > > > slides 214 thru 224 "hidden" by chance?
> > > > > --
> > > > >
> > > > > Sonia Coleman
> > > > > Microsoft PowerPoint MVP Team
> > > > > Autorun Software, Templates and Tutorials
> > > > >
> > > > > "Par" <Par@discussions.microsoft.com> wrote in message
> > > > > news:2754DE82-FA34-4F76-8CA3-585638BA6BB8@microsoft.com...
> > > > > > Hi, my presentation contain 224 slides, but the show always stop after
> > > slide
> > > > > > number 213. i cannot show any slides after 213 as a view. Is there any
> > > limit,
> > > > > > og did I miss a a setting. Thanks for help
> > > > > > --
> > > > > > Per
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
>
>
> |
| |
|
| |
Was this post helpful to you? |
|
|
|
|
|
|
|
Reply |
| |
|
|
Top |
|
|
|
|
|
Question
Notify me of replies