Windows Logo Kit 1.2 - QFE 更新

更新日期: 2008 年 9 月 23 日

WLK (Windows Logo Kit) 包含裝置欲取得 Windows 認證所需的所有事物:DTM (Driver Test Manager)、必要的測試,以及安裝設定 DTM 與執行必要測試所需的文件。WLK v1.2 的更新或 QFE (Quick Fix Engineerin) 版本在可允許下載使用時都將公佈於此。

重要事項:QFE 安裝注意事項

在您安裝 QFE 之後您無法再繼續安裝前尚在執行的 Logo 測試。您將需要重新建立新的 Logo 測試執行項目。

您可以在 \Windows 目錄下找到 QFE 安裝時所產生的 Log 檔案。

*
本頁內容
DTM 測試控管 (基礎結構) QFE 封裝套件DTM 測試控管 (基礎結構) QFE 封裝套件
WLK Logo \ 測試內容 QFE 封裝套件WLK Logo \ 測試內容 QFE 封裝套件

DTM 測試控管 (基礎結構) QFE 封裝套件

WLK QFE 002:在載入裝置 INF 時主控程式懸置 (Studio Hangs) 無法執行
 下載 WLK QFE 002 [12.2 MB]

更新說明:這個 QFE 解決了當 DTM 無法分析裝置安裝檔案中某些 Type 時所造成的失敗結果:

DTM Studio。若 INF 具有 [copyfiles] 文法,DTM 主控程式可能無法正確分析此種語法而造成失敗的結果,並產生 "Out of Memory Exception" 錯誤訊息。

WLK 版本: v1.2 (1.2.6475.000)。請勿將此 QFE 安裝於其它版本的主控站上。

回到頁首回到頁首

WLK Logo \ 測試內容 QFE 封裝套件

WLK QFE 001:MCE IR 接收器測試之重大更新
 Download WLK QFE 001 [588 KB]

更新說明:這個 QFE 解決造成 AVStream 與 PCI 裝置認證測試被封鎖的測試環境安裝問題。此問題具下列的症狀:

在執行所有認證測試前即得到 CIRTest 失敗的結果,並傳回錯誤訊息 "No More Items Found, Error 259":
CIRTest 嘗試將 Device Under Test 設為 Active Receiver,但是附於 AVStream 匯流排的裝置無法運作。此封裝套件現已可允許 AVStream 與 PCI 裝置設定為使用中的接收器並開始執行證認測試。

注意:此 QFE 僅可套用在當您企圖為 AVStream 或 PCI 為基底的 CIR 裝置進行認證時。

WLK 版本: v1.2 (1.2.6475.000)。請勿將此 QFE 安裝於其它版本的主控站上。

WLK QFE 003:修正 Windows Server 2008 Server 系統與伺服器虛擬化驗證 (Server Virtualization Validation) Submission 中 IsVM / DetectVM 測試的放置
 Download WLK QFE 003 [515 KB]

更新說明:此 QFE 解決了下列的問題:

將 IsVM/detectvm.exe 測試由 Windows Server 2008 伺服器系統 Logo 測試清單中移除

將 IsVM/detectvm.exe 測試置入 Windows Server 2008 伺服器虛擬化驗證 (Server Virtualization Validation) 測試清單中

注意:若您欲進行所有 Windows Server 2008 Server System 與 SVVP (Server Virtualization Validation Program) Submission,Microsoft 建議您立即安裝此 QFE。

WLK 版本: v1.2 (1.2.6475.000)。請勿將此 QFE 安裝於其它版本的主控站上。

WLK QFE 005: XPS Content Library ViolateOne Update
 Download WLK QFE 005 [1.1 MB]

Update Description: This QFE addresses several issues in the XPS Content Library's ViolateOne jobs. It reduces the number of jobs that may be printed by certain types of devices considerably, thus streamlining manual output validation.

The following documents have been fixed and should not print.

XPS\M2.17a.xps

XPS\M2.18a.xps

XPS\M2.25a.xps

XPS\M2.35a.xps

OPC\M1.10a.xps

The following documents have been removed from the WLK entirely by this QFE.

Thumbnail tests (Errata 905)

XPS\M2.36a.xps

XPS\M2.37a.xps

PreservedElements, PreservedAttributes tests (Errata 919)

MC\M2.20a.xps

MC\M2.24a.xps

Parameter Validation of RFC 3066 (Errata 920)

XPS\M2.76a.xps

Documents that remain in the deleting - printed state (Errata 958; Additional documents may still hang in Deleting - Printed state, but should not be considered a failure)

XPS\M2.4b.xps

XPS\M2.5b.xps

XPS\M2.14a.xps

Documents that are remediated in the Filter Pipeline (Errata 1003)

OPC\M1.20b.xps

XPS\M2.2b.xps

XPS\M2.2c.xps

Bleed box tests (Errata 1004)

XPS\M3.7a.xps

XPS\M3.8a.xps

XPS\M3.9a.xps

XPS\M3.10a.xps

Content Box tests (Errata 1005)

XPS\M3.11a.xps

XPS\M3.11b.xps

XPS\M3.12a.xps

XPS\M3.12b.xps

XPS\M3.13a.xps

XPS\M3.14a.xps

Xml:lang validation (Errata 1006)

XPS\M7.3a.xps

Additional Files cleaned by filter pipeline

OPC\M1.9a.xps

OPC\M1.25a.xps

Notes: Microsoft highly recommends that this QFE be installed immediately on any DTM 1.2 controllers used to test Printers.

WLK Version: v1.2 (1.2.6475.000). Do not attempt to install this QFE on any other controller build.

WLK QFE 006: Critical updates for Wireless Networking and MPE
 Download WLK QFE 006 [2.5 MB]

Update Description: This QFE addresses several critical issues in the Wireless Networking Logo Program as well as the MPE tests:

MPE: tests throw RTH_TASK_EXCEUTION_EXCEPTION in the event of bind failure

MPE: test fails to end even after the runtime is expired

MPE: fixed an assert due to a mutex being released twice

WLAN: Roaming_cmn test should not reset the device miniport driver right after system resumes from hibernation

WLAN: Roaming_cmn test causes the machine to go to sleep after test is finished

WLAN: Roaming_cmn test removed the requirement that AP1's BSSID should be removed from the DUT scan list thirty seconds after DUT disconnected from AP1

WLAN: Packetfilters_ext test no longer requires the DUT to have the OID_DOT11_HIDDEN_NETWORK_ENABLED set to false after it resumes back from hibernation or sleep

WLAN: SafeMode_ext test should count all the net buffers in the net buffer lists for fragmented packets

WLAN: SafeMode_ext should test WPA2/CCMP combination

WLK Version: v1.2 (1.2.6475.000). Do not attempt to install this QFE on any other controller build.


回到頁首回到頁首