Microsoft Security Bulletin MS07-016

In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability In addition, Web sites that accept or host user-provided content, or compromised Web sites and advertisement servers could contain specially crafted content that could exploit this vulnerability. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.

An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce the number of successful attacks that exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail, they could still be vulnerable to this issue through the Web-based attack scenario.

By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.

COM Objects not intended to be instantiated in Internet Explorer are not included in the default allow-list for ActiveX controls in Windows Internet Explorer 7. Customers who are running Windows Internet Explorer 7 with default settings are therefore not at risk unless these COM Objects have been activated through the ActiveX opt-in feature in the Internet Zone. Customers who are upgrading to Windows Internet Explorer 7 and have enabled these COM objects in previous versions of Internet Explorer will have them enabled in Windows Internet Explorer 7. For more information on the ActiveX Opt-in feature and how to add ActiveX controls to the pre-approved list, see the product documentation.

Windows Internet Explorer 7 in Windows Vista is not affected by this vulnerability.

Configure Internet Explorer to prompt before running ActiveX Controls or disable ActiveX Controls in the Internet and Local intranet security zone

You can help protect against this vulnerability by changing your Internet Explorer settings to prompt before running ActiveX controls. To do this, follow these steps:

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Prevent COM objects from running in Internet Explorer

You can disable attempts to instantiate a COM object in Internet Explorer by setting the kill bit for the control in the registry.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

For detailed steps that you can use to prevent a control from running in Internet Explorer, see Microsoft Knowledge Base Article 240797. Follow these steps in this article to create a Compatibility Flags value in the registry to prevent a COM object from being instantiated in Internet Explorer.

To set the kill bit for a CLSID with a value of {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}, paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{ XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }]
"Compatibility Flags"=dword:00000400

You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:

Group Policy collection

What is Group Policy Object Editor?

Core Group Policy tools and settings

Note You must restart Internet Explorer for your changes to take effect.

The Class Identifiers and corresponding files where the COM objects are contained are documented under “What does the update do?” in the “FAQ for COM Object Instantiation Memory Corruption Vulnerability - CVE-2006-4697” section.

Impact of Workaround: There is no impact as long as the COM object is not intended to be used in Internet Explorer.

Security level for the Internet zone is set to High. This setting disables scripts, ActiveX components, Microsoft virtual machine (Microsoft VM) HTML content, and file downloads.

Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.

Install on Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.

Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, Web sites that accept or host user-provided content or compromised Web sites and advertisement servers could contain specially crafted content that could exploit this vulnerability. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.

An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce the number of successful attacks that exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.

By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.

COM Objects not intended to be instantiated in Internet Explorer are not included in the default allow-list for ActiveX controls in Windows Internet Explorer 7. Customers who are running Windows Internet Explorer 7 with default settings, are therefore not at risk unless these COM Objects have been activated through the ActiveX opt-in feature in the Internet Zone. Customers who are upgrading to Windows Internet Explorer 7 and have enabled these COM objects in previous versions of Internet Explorer will have them enabled in Windows Internet Explorer 7. For more information on the ActiveX Opt-in feature and how to add ActiveX controls to the pre-approved list, see the product documentation.

Windows Internet Explorer 7 in Windows Vista is not affected by this vulnerability.

Configure Internet Explorer to prompt before running ActiveX Controls or disable ActiveX Controls in the Internet and Local intranet security zone

You can help protect against this vulnerability by changing your Internet Explorer settings to prompt before running ActiveX controls. To do this, follow these steps:

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone.

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Prevent COM objects from running in Internet Explorer

You can disable attempts to instantiate a COM object in Internet Explorer by setting the kill bit for the control in the registry.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

For detailed steps that you can use to prevent a control from running in Internet Explorer, see Microsoft Knowledge Base Article 240797. Follow these steps in this article to create a Compatibility Flags value in the registry to prevent a COM object from being instantiated in Internet Explorer.

To set the kill bit for a CLSID with a value of {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}, paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{ XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }]
"Compatibility Flags"=dword:00000400

You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:

Group Policy collection

What is Group Policy Object Editor?

Core Group Policy tools and settings

Note You must restart Internet Explorer for your changes to take effect.

The Class Identifiers and corresponding files where the COM objects are contained are documented under “What does the update do?” in the “FAQ for COM Object Instantiation Memory Corruption Vulnerability - CVE-2006-4697” section.

Impact of Workaround: There is no impact as long as the COM object is not intended to be used in Internet Explorer.

Security level for the Internet zone is set to High. This setting disables scripts, ActiveX components, Microsoft virtual machine (Microsoft VM) HTML content, and file downloads.

Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.

Install on Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.

Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

In a Web-based attack scenario, an attacker would have to host an FTP server that would return these specially crafted FTP server responses to exploit this vulnerability. An attacker would have no way to force users to visit the site with the FTP server. Instead, an attacker would have to persuade them to visit the site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's site.

An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.

Note It cannot be ruled out that this vulnerability could be used in an exploit without Active Scripting. However, using Active Scripting significantly increases the chances of a successful exploit. As a result, this vulnerability has been given a severity rating of Critical on Windows Server 2003.

By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.

Read e-mail messages in plain text format if you are using Outlook 2002 or a later version, or Outlook Express 6 SP1 or a later version, to help protect yourself from the HTML e-mail attack vector.

Microsoft Outlook 2002 users who have applied Office XP Service Pack 1 or a later version and Microsoft Outlook Express 6 users who have applied Internet Explorer 6 Service Pack 1 or a later version can enable this setting and view e-mail messages that are not digitally signed or e-mail messages that are not encrypted in plain text only.

Digitally signed e-mail messages or encrypted e-mail messages are not affected by the setting and may be read in their original formats. For more information about how to enable this setting in Outlook 2002, see Microsoft Knowledge Base Article 307594.

For information about this setting in Outlook Express 6, see Microsoft Knowledge Base Article 291387.

Impact of Workaround: E-mail messages that are viewed in plain text format will not contain pictures, specialized fonts, animations, or other rich content. Additionally:

Security level for the Internet zone is set to High. This setting disables scripts, ActiveX components, Microsoft virtual machine (Microsoft VM) HTML content, and file downloads.

Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.

Install on Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.

Multimedia content is disabled. This setting prevents music, animations, and video clips from running.