TechNet Home > TechNet Security > Bulletins

Microsoft Security Bulletin MS06-072

Cumulative Security Update for Internet Explorer (925454)

Published: December 12, 2006 | Updated: December 14, 2006

Version: 1.1

Summary

Who Should Read this Document: Customers who use Microsoft Windows

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Critical

Recommendation: Customers should apply the update immediately.

Security Update Replacement: This bulletin replaces several prior security updates. See the frequently asked questions (FAQ) section of this bulletin for the complete list.

Caveats: Microsoft Knowledge Base Article 925454 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 925454.

Tested Software and Security Update Download Locations:

Affected Software:

•	Microsoft Windows 2000 Service Pack 4
•	Microsoft Windows XP Service Pack 2
•	Microsoft Windows XP Professional x64 Edition
•	Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1
•	Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with SP1 for Itanium-based Systems
•	Microsoft Windows Server 2003 x64 Edition

Non-Affected Software:

•	Windows Vista

Tested Microsoft Windows Components:

Affected Components:

•	Microsoft Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 — Download the update
•	Microsoft Internet Explorer 6 Service Pack 1 when installed on Windows 2000 Service Pack 4 — Download the update
•	Microsoft Internet Explorer 6 for Windows XP Service Pack 2 — Download the update
•	Microsoft Internet Explorer 6 for Windows XP Professional x64 Edition — Download the update
•	Microsoft Internet Explorer 6 for Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1 — Download the update
•	Microsoft Internet Explorer 6 for Windows Server 2003 for Itanium-based Systems and Windows Server 2003 with SP1 for Itanium-based Systems — Download the update
•	Microsoft Internet Explorer 6 for Windows Server 2003 x64 Edition — Download the update

Non-Affected Components:

•	Windows Internet Explorer 7 for Windows XP Service Pack 2
•	Windows Internet Explorer 7 for Windows XP Professional x64 Edition
•	Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1
•	Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems
•	Windows Internet Explorer 7 for Windows Server 2003 x64 Edition
•	Windows Internet Explorer 7 in Windows Vista

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

Note The security updates for Microsoft Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

Top of section

General Information

Executive Summary

Executive Summary:

This update resolves several newly discovered vulnerabilities. Each vulnerability is documented in its own subsection in the "Vulnerability Details" section of this bulletin.

If a user is logged on with administrative user rights, an attacker who successfully exploited the most severe of these vulnerabilities could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

We recommend that customers apply the update immediately.

Vulnerability Identifiers	Impact of Vulnerability	Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4	Internet Explorer 6 Service Pack 1 when installed on Windows 2000 Service Pack 4	Internet Explorer 6 for Windows Server 2003 and Windows Server 2003 Service Pack 1	Internet Explorer 6 for Windows XP Service Pack 2
Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579	Remote Code Execution	None	Critical	Moderate	Critical
DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581	Remote Code Execution	None	Critical	Moderate	Critical
TIF Folder Information Disclosure Vulnerability - CVE-2006-5578	Information Disclosure	Important	Important	Low	Important
TIF Folder Information Disclosure Vulnerability - CVE-2006-5577	Information Disclosure	Moderate	Moderate	Low	Moderate
Aggregate Severity of All Vulnerabilities		Important	Critical	Moderate	Critical

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.

Note The security updates for Windows Server 2003, Windows Server 2003 Service Pack 1, and Windows Server 2003 x64 Edition also apply to Windows Server 2003 R2.

Note The severity ratings for non-x86 operating system versions map to the x86 operating systems versions as follows:

•	The Internet Explorer 6 for Windows XP Professional x64 Edition severity rating is the same as the Internet Explorer 6 for Windows XP Service Pack 2 severity rating.
•	The Internet Explorer 6 for Windows Server 2003 for Itanium-based Systems and Windows Server 2003 x64 Edition severity rating is the same as the Internet Explorer 6 for Windows Server 2003 severity rating.

Top of section

Frequently Asked Questions (FAQ) Related to This Security Update

Why does this update address several reported security vulnerabilities?
This update contains support for several vulnerabilities because the modifications that are required to address these issues are located in related files. Instead of having to install several updates that are almost the same, customers can install only this update

What updates does this release replace?
This security update replaces a prior security update. The security bulletin ID and affected operating systems are listed in the following table.

Bulletin ID	Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4	Internet Explorer 6 Service Pack 1 when installed on Windows 2000 Service Pack 4	Internet Explorer 6 for Windows Server 2003 and Windows Server 2003 Service Pack 1	Internet Explorer 6 for Windows XP Service Pack 2
MS06-067	Replaced	Replaced	Replaced	Replaced

What are the known issues that customers may experience when they install this security update?
Microsoft Knowledge Base Article 925454 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 925454.

Does this update contain any security-related changes to functionality?
Yes. Besides the changes that are listed in the "Vulnerability Details" section of this bulletin, this update includes improvements to the Internet Explorer Pop-up Blocker. The Pop-up Blocker was first included in Windows XP Service Pack 2 and is also included in Windows Server 2003 Service Pack 1. For more information about the Pop-up Blocker, see the product documentation.

Does this update contain any changes to functionality?
Yes. Besides the changes that are listed in the “Vulnerability Details” section of this bulletin, there are also changes not related to security that were introduced in previous Internet Explorer bulletins.

Extended security update support for Microsoft Windows XP Home Edition Service Pack 1 or Service Pack 1a, Windows XP Media Center Edition 2002 Service Pack 1, Windows XP Media Center Edition 2004 Service Pack 1, Windows XP Professional Service Pack 1 or Service Pack 1a, and Windows XP Tablet PC Edition Service Pack 1 ended on October 10, 2006. I am still using one of these operating systems; what should I do?
Windows XP (all versions) Service Pack 1 has reached the end of its support life cycle. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Extended security update support for Microsoft Windows 98, Windows 98 Second Edition, or Windows Millennium Edition ended on July 11, 2006. I am still using one of these operating systems; what should I do?
Windows 98, Windows 98 Second Edition, and Windows Millennium Edition have reached the end of their support life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Extended security update support for Microsoft Windows NT Workstation 4.0 Service Pack 6a and Windows 2000 Service Pack 2 ended on June 30, 2004. Extended security update support for Microsoft Windows NT Server 4.0 Service Pack 6a ended on December 31, 2004. Extended security update support for Microsoft Windows 2000 Service Pack 3 ended on June 30, 2005. I am still using one of these operating systems; what should I do?
Windows NT Workstation 4.0 Service Pack 6a, Windows NT Server 4.0 Service Pack 6a, Windows 2000 Service Pack 2, and Windows 2000 Service Pack 3 have reached the end of their support life cycles. It should be a priority for customers who have these operating system versions to migrate to supported versions to prevent potential exposure to vulnerabilities. For more information about the Windows Product Lifecycle, visit the following Microsoft Support Lifecycle Web site. For more information about the extended security update support period for these operating system versions, visit the Microsoft Product Support Services Web site.

Customers who require custom support for these products must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Windows Operating System Product Support Lifecycle FAQ.

Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?
The following table provides the MBSA detection summary for this security update.

Software	MBSA 1.2.1	MBSA 2.0
Microsoft Windows 2000 Service Pack 4	Yes	Yes
Microsoft Windows XP Service Pack 2	Yes	Yes
Microsoft Windows XP Professional x64 Edition	No	Yes
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1	Yes	Yes
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems	No	Yes
Microsoft Windows Server 2003 x64 Edition family	No	Yes

For more information about MBSA, visit the MBSA Web site. For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.

For more detailed information, see Microsoft Knowledge Base Article 910723.

Can I use Systems Management Server (SMS) to determine whether this update is required?
The following table provides the SMS detection summary for this security update.

Software	SMS 2.0	SMS 2003
Microsoft Windows 2000 Service Pack 4	Yes	Yes
Microsoft Windows XP Service Pack 2	Yes	Yes
Microsoft Windows XP Professional x64 Edition	No	Yes
Microsoft Windows Server 2003 and Microsoft Windows Server 2003 Service Pack 1	Yes	Yes
Microsoft Windows Server 2003 for Itanium-based Systems and Microsoft Windows Server 2003 with Service Pack 1 for Itanium-based Systems	No	Yes
Microsoft Windows Server 2003 x64 Edition family	No	Yes

For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about SUIT, visit the following Microsoft Web site. For more information about the limitations of SUIT, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723.

Top of section

Vulnerability Details

Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

A remote code execution vulnerability exists in Internet Explorer due to attempts to access previously freed memory when handling script errors in certain situations. An attacker could exploit the vulnerability by constructing a specially crafted Web page. If a user viewed the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

•	In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
•	An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
•	By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
•	By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
•	Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.
•	Microsoft Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 is not affected by this vulnerability.

Top of section

Workarounds for Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

•

Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

1.	In Internet Explorer, click Internet Options on the Tools menu.
2.	Click the Security tab.
3.	Click Internet, and then click Custom Level.
4.	Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
5.	Click Local intranet, and then click Custom Level.
6.	Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
7.	Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are "*.windowsupdate.microsoft.com" and “*.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

•

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

1.	On the Internet Explorer Tools menu, click Internet Options.
2.	In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
3.	Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

Top of section

FAQ for Script Error Handling Memory Corruption Vulnerability - CVE-2006-5579:

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could remotely take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
Internet Explorer attempts to access previously freed memory when handling script errors in certain situations. As a result, system memory may be corrupted in such a way that an attacker could execute arbitrary code.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited these vulnerabilities could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit these vulnerabilities through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from these vulnerabilities.

I am running Internet Explorer on Windows Server 2003. Does this mitigate these vulnerabilities?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone.

What is the Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or of an administrator downloading and running specially crafted Web content on a server. Internet Explorer Enhanced Security Configuration reduces this risk by modifying many security-related settings. This includes the settings on the Security tab and the Advanced tab in the Internet Options dialog box. Some of the important modifications include the following:

•	Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
•	Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
•	Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
•	Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by modifying the script error exception handling so that there is no attempt made to access the freed memory.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Top of section

DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

A remote code execution vulnerability exists in the way Internet Explorer interprets certain DHTML script function calls to incorrectly created elements. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could potentially allow remote code execution if a user viewed the Web page. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

•	In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
•	An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
•	By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
•	By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
•	Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.
•	Microsoft Internet Explorer 5.01 Service Pack 4 on Windows 2000 Service Pack 4 is not affected by this vulnerability.

Top of section

Workarounds for DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

•

Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

1.	In Internet Explorer, click Internet Options on the Tools menu.
2.	Click the Security tab.
3.	Click Internet, and then click Custom Level.
4.	Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
5.	Click Local intranet, and then click Custom Level.
6.	Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
7.	Click OK two times to return to Internet Explorer.

Add sites that you trust to the Internet Explorer Trusted sites zone.

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

•

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

1.	On the Internet Explorer Tools menu, click Internet Options.
2.	In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
3.	Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”

Add sites that you trust to the Internet Explorer Trusted sites zone.

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

Top of section

FAQ for DHTML Script Function Memory Corruption Vulnerability - CVE-2006-5581:

What causes the vulnerability?
When Internet Explorer interprets certain DHTML script function calls to incorrectly created elements it may corrupt system memory in such a way that an attacker could execute arbitrary code.

•	Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
•	Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
•	Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
•	Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by modifying the way that Internet Explorer handles the DHTML script function call.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

Top of section

TIF Folder Information Disclosure Vulnerability - CVE-2006-5578

An information disclosure vulnerability exists in Internet Explorer in the way that drag and drop operations are handled in certain situations. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure if a user viewed and interacted with the Web page. An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system.

Mitigating Factors for TIF Folder Information Disclosure Vulnerability - CVE-2006-5578:

•	User interaction is required to exploit this vulnerability.
•	In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit these vulnerabilities. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
•	By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
•	By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
•	Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.

Top of section

Workarounds for TIF Folder Information Disclosure Vulnerability - CVE-2006-5578:

•

Disable “Drag and Drop or copy and paste files” in Internet Explorer

Disable the Drag and drop or copy and paste files option in the Internet and intranet zones. To do this, follow these steps:

1.	In Internet Explorer, click Internet Options on the Tools menu, and then click the Security tab.
2.	In the Select a Web content zone to specify its security settings box, click Internet, and then click Custom Level.
3.	In the Settings box, locate the Drag and drop or copy and paste files option under Miscellaneous. Make a note of your current setting.
4.	Under Drag and drop or copy and paste files, click Disable, and then click OK.
5.	Click Yes, and then click OK two times.

Note Repeat these steps for the local intranet zone by clicking Local intranet instead of Internet in step 2.

•

Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

1.	In Internet Explorer, click Internet Options on the Tools menu.
2.	Click the Security tab.
3.	Click Internet, and then click Custom Level.
4.	Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
5.	Click Local intranet, and then click Custom Level.
6.	Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.
7.	Click OK two times to return to Internet Explorer.

•

Add sites that you trust to the Internet Explorer Trusted sites zone

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

•

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

1.	On the Internet Explorer Tools menu, click Internet Options.
2.	In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
3.	Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

•

Add sites that you trust to the Internet Explorer Trusted sites zone

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

Top of section

FAQ for TIF Folder Information Disclosure Vulnerability - CVE-2006-5578:

What is the scope of the vulnerability?
This is an information disclosure vulnerability. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure of cached content in the Temporary Internet Files (TIF) folder if a user viewed and interacted with the Web page.

What causes the vulnerability?
The vulnerability is a result of how Internet Explorer handles drag and drop operations in certain situations.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then persuade a user to view the Web site. This can also include Web sites that accept user-provided content or advertisements, Web sites that host user-provided content or advertisements, and compromised Web sites. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

•	Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
•	Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
•	Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
•	Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by ensuring that a drag and drop operation does not expose the location of the cached content in the TIF folder.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure. Microsoft had not received any information to indicate that this vulnerability had been publicly disclosed when this security bulletin was originally issued.

Top of section

TIF Folder Information Disclosure Vulnerability - CVE-2006-5577:

An information disclosure vulnerability exists in Internet Explorer in certain scenarios where the path to the cached content in the TIF folder could be disclosed. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could allow for information disclosure if a user viewed the Web page. An attacker who successfully exploited this vulnerability would be able to retrieve files from the Temporary Internet Files (TIF) folder on a user’s system. However, user interaction is required to exploit this vulnerability.

Mitigating Factors for TIF Folder Information Disclosure Vulnerability - CSV-2006-5577:

•	In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit these vulnerabilities. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit these vulnerabilities. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
•	By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.
•	By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
•	Windows Internet Explorer 7 for Windows XP Service Pack 2, Windows Internet Explorer 7 for Windows XP Professional x64 Edition, Windows Internet Explorer 7 for Windows Server 2003 Service Pack 1, Windows Internet Explorer 7 for Windows Server 2003 with SP1 for Itanium-based Systems, Windows Internet Explorer 7 for Windows Server 2003 x64 Edition, and Windows Internet Explorer 7 in Windows Vista are not affected by this vulnerability.

Top of section

Workarounds for TIF Folder Information Disclosure Vulnerability - CVE-2006-5577:

•

Configure Internet Explorer to prompt before running ActiveX Controls or disable ActiveX Controls in the Internet and Local intranet security zone

You can help protect against these vulnerabilities by changing your Internet Explorer settings to prompt before running ActiveX controls. To do this, follow these steps:

1.	In Internet Explorer, click Internet Options on the Tools menu.
2.	Click the Security tab.
3.	Click Internet, and then click Custom Level.
4.	Under Settings, in the ActiveX controls and plug-ins section, under Run ActiveX controls and plug-ins, click Prompt or Disable, and then click OK.
5.	Click Local intranet, and then click Custom Level.
6.	Under Settings, in the ActiveX controls and plug-ins section, under Run ActiveX controls and plug-ins, click Prompt or Disable, and then click OK.
7.	Click OK two times to return to Internet Explorer.

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

•

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against these vulnerabilities by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

1.	On the Internet Explorer Tools menu, click Internet Options.
2.	In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
3.	Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Add sites that you trust to the Internet Explorer Trusted sites zone

To do this, follow these steps:

1.	In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2.	In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3.	If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4.	In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5.	Repeat these steps for each site that you want to add to the zone.
6.	Click OK two times to accept the changes and return to Internet Explorer.

Top of section

FAQ for TIF Folder Information Disclosure Vulnerability - CVE-2006-5577:

What causes the vulnerability?
In certain scenarios, an OBJECT tag can disclose the path to the cached content in the TIF folder

•	Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.
•	Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.
•	Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.
•	Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration, at the following Web site.

What does the update do?
The update removes the vulnerability by ensuring that OBJECT tags do not expose sensitive paths to script.

Top of section

Security Update Information

Affected Software:

For information about the specific security update for your affected software, click the appropriate link:

Internet Explorer 5.01 Service Pack 4 on Windows 2000 (all versions)

Prerequisites
For Windows 2000, this security update requires Service Pack 4 (SP4). For Small Business Server 2000, this security update requires Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

The software that is listed has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs:
The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem	Overwrites OEM files without prompting
/nobackup	Does not back up files needed for uninstall
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files
/extract[:path]	Extracts files without starting the Setup program
/ER	Enables extended error reporting
/verbose	Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site. For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE5.01sp4-KB925454-Windows2000sp4-x86-ENU.exe /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454-IE501SP4-20061116.120000.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE5.01sp4-KB925454-Windows2000sp4-x86-ENU.exe /norestart

For more information about how to deploy this security update with Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

You must restart your system after you apply this security update.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454-IE501SP4-20061116.120000$\Spuninst folder.

Supported Spuninst.exe Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files

File Information

The English version of this security update has the file attributes that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.

Windows 2000 Service Pack 4 and Small Business Server 2000:

File Name	Version	Date	Time	Size
Browseui.dll	5.0.3846.2300	23-Oct-2006	18:32	792,848
Danim.dll	6.1.9.729	23-Oct-2006	07:42	1,134,352
Iepeers.dll	5.0.3846.2300	23-Oct-2006	18:38	100,112
Inseng.dll	5.0.3846.2300	23-Oct-2006	18:39	74,000
Jsproxy.dll	5.0.3846.2300	23-Oct-2006	18:38	13,584
Mshtml.dll	5.0.3846.2300	23-Oct-2006	18:38	2,303,248
Msrating.dll	5.0.3846.2300	23-Oct-2006	18:34	149,776
Pngfilt.dll	5.0.3846.2300	23-Oct-2006	18:38	48,912
Shdocvw.dll	5.0.3846.2300	23-Oct-2006	18:31	1,104,656
Shlwapi.dll	5.0.3900.7070	23-Oct-2006	20:03	284,432
Url.dll	5.50.4970.2300	23-Oct-2006	18:28	84,240
Urlmon.dll	5.0.3846.2300	23-Oct-2006	18:39	424,208
Wininet.dll	5.0.3846.2300	23-Oct-2006	18:38	451,344

Verifying that the Update Has Been Applied

•	Microsoft Baseline Security Analyzer

To verify that a security update has been applied to an affected system, you can use the Microsoft Baseline Security Analyzer (MBSA) tool. MBSA allows administrators to scan local and remote systems for missing security updates and for common security misconfigurations. For more information about MBSA, visit the Microsoft Baseline Security Analyzer Web site.

•	File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

1.	Click Start, and then click Search.
2.	In the Search Results pane, click All files and folders under Search Companion.
3.	In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
4.	In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
5.	On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

•	Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Internet Explorer 5.01\SP4\KB925454-IE501SP4-20061116.120000\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly when an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Top of section

Internet Explorer 6 Service Pack 1 for Windows 2000 (all versions)

Prerequisites
To install the Internet Explorer 6 Service Pack 1 (SP1) version of this update, you must be running Internet Explorer 6 SP1 (version 6.00.2800.1106) on one of the following versions of Windows:

•	Microsoft Windows 2000 Service Pack 4
•	Microsoft Small Business Server 2000 Service Pack 1a (SP1a) or Small Business Server 2000 running with Windows 2000 Server Service Pack 4 (SP4).

For more information about how to obtain the latest service pack, see Microsoft Knowledge Base Article 260910.

Inclusion in Future Service Packs:
The update for this issue may be included in a future Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem	Overwrites OEM files without prompting
/nobackup	Does not back up files needed for uninstall
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files
/extract[:path]	Extracts files without starting the Setup program
/ER	Enables extended error reporting
/verbose	Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE6.0sp1-KB925454-Windows-2000-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454-IE6SP1-20061116.120000.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows 2000 Service Pack 4:

IE6.0sp1-KB925454-Windows-2000-x86-enu /norestart

Restart Requirement

You must restart your system after you apply this security update.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454-IE6SP1-20061116.120000$\Spuninst folder.

Supported Spuninst.exe Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files

File Information

Windows 2000 Service Pack 4 and Small Business Server 2000:

File Name	Version	Date	Time	Size	Folder
Browseui.dll	6.0.2800.1896	23-Oct-2006	17:20	1,017,856	RTMGDR
Cdfview.dll	6.0.2800.1896	23-Oct-2006	17:21	143,360	RTMGDR
Danim.dll	6.3.1.148	24-Oct-2006	18:22	986,112	RTMGDR
Dxtmsft.dll	6.3.2800.1586	23-Oct-2006	17:24	351,744	RTMGDR
Dxtrans.dll	6.3.2800.1586	23-Oct-2006	17:24	192,512	RTMGDR
Iepeers.dll	6.0.2800.1586	23-Oct-2006	17:24	236,032	RTMGDR
Inseng.dll	6.0.2800.1586	23-Oct-2006	17:24	69,632	RTMGDR
Jsproxy.dll	6.0.2800.1586	23-Oct-2006	17:25	12,288	RTMGDR
Mshtml.dll	6.0.2800.1586	23-Oct-2006	17:24	2,704,896	RTMGDR
Msrating.dll	6.0.2800.1896	23-Oct-2006	17:21	132,096	RTMGDR
Mstime.dll	6.0.2800.1586	23-Oct-2006	17:23	498,176	RTMGDR
Pngfilt.dll	6.0.2800.1586	23-Oct-2006	17:24	34,816	RTMGDR
Shdocvw.dll	6.0.2800.1896	23-Oct-2006	17:20	1,340,416	RTMGDR
Shlwapi.dll	6.0.2800.1896	23-Oct-2006	17:20	402,944	RTMGDR
Urlmon.dll	6.0.2800.1586	23-Oct-2006	17:25	461,824	RTMGDR
Wininet.dll	6.0.2800.1586	23-Oct-2006	17:25	575,488	RTMGDR
Browseui.dll	6.0.2800.1896	23-Oct-2006	17:20	1,017,856	RTMQFE
Cdfview.dll	6.0.2800.1896	23-Oct-2006	17:21	143,360	RTMQFE
Danim.dll	6.3.1.148	24-Oct-2006	18:22	986,112	RTMQFE
Dxtmsft.dll	6.3.2800.1587	23-Oct-2006	17:21	351,744	RTMQFE
Dxtrans.dll	6.3.2800.1587	23-Oct-2006	17:21	192,512	RTMQFE
Iepeers.dll	6.0.2800.1587	23-Oct-2006	17:22	236,544	RTMQFE
Inseng.dll	6.0.2800.1587	23-Oct-2006	17:22	69,632	RTMQFE
Jsproxy.dll	6.0.2800.1587	23-Oct-2006	17:23	12,288	RTMQFE
Mshtml.dll	6.0.2800.1587	23-Oct-2006	17:21	2,711,552	RTMQFE
Msrating.dll	6.0.2800.1896	23-Oct-2006	17:21	132,096	RTMQFE
Mstime.dll	6.0.2800.1587	23-Oct-2006	17:21	498,176	RTMQFE
Pngfilt.dll	6.0.2800.1587	23-Oct-2006	17:22	38,912	RTMQFE
Shdocvw.dll	6.0.2800.1896	23-Oct-2006	17:20	1,340,416	RTMQFE
Shlwapi.dll	6.0.2800.1896	23-Oct-2006	17:20	402,944	RTMQFE
Urlmon.dll	6.0.2800.1587	23-Oct-2006	17:23	463,872	RTMQFE
Wininet.dll	6.0.2800.1587	23-Oct-2006	17:23	587,776	RTMQFE

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

•	Microsoft Baseline Security Analyzer

•	File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

1.	Click Start, and then click Search.
2.	In the Search Results pane, click All files and folders under Search Companion.
3.	In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
4.	In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
5.	On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

•	Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Internet Explorer 6\SP1\KB925454-IE6SP1-20061116.120000\Filelist

Top of section

Windows XP Service Pack 2 (all versions) and Windows XP Professional x64 Edition

This security update requires Microsoft Windows XP Service Pack 2. For more information, see Microsoft Knowledge Base Article 322389.

Note For Windows XP Professional x64 Edition, this security update is the same as the Windows Server 2003 x64 Edition security update.

Inclusion in Future Service Packs:
The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem	Overwrites OEM files without prompting
/nobackup	Does not back up files needed for uninstall
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files
/integrate:path	Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]	Extracts files without starting the Setup program
/ER	Enables extended error reporting
/verbose	Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Microsoft Windows XP:

Windowsxp-kb925454-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows XP:

Windowsxp-kb925454-x86-enu /norestart

For information about how to deploy this security update by using Software Update Services, visit the Software Update Services Web site. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site. This security update will also be available through the Microsoft Update Web site.

Restart Requirement

You must restart your system after you apply this security update.

Removal Information

To remove this security update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454$\Spuninst folder.

Supported Spuninst.exe Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files

File Information

Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

File Name	Version	Date	Time	Size	Folder
Browseui.dll	6.0.2900.3020	23-Oct-2006	15:17	1,022,976	SP2GDR
Cdfview.dll	6.0.2900.3020	23-Oct-2006	15:17	151,040	SP2GDR
Danim.dll	6.3.1.148	23-Oct-2006	15:17	1,054,208	SP2GDR
Dxtmsft.dll	6.3.2900.3020	23-Oct-2006	15:17	357,888	SP2GDR
Dxtrans.dll	6.3.2900.3020	23-Oct-2006	15:17	205,312	SP2GDR
Extmgr.dll	6.0.2900.3020	23-Oct-2006	15:17	55,808	SP2GDR
Iedw.exe	5.1.2600.3020	23-Oct-2006	11:00	18,432	SP2GDR
Iepeers.dll	6.0.2900.3020	23-Oct-2006	15:17	251,392	SP2GDR
Inseng.dll	6.0.2900.3020	23-Oct-2006	15:17	96,256	SP2GDR
Jsproxy.dll	6.0.2900.3020	23-Oct-2006	15:17	16,384	SP2GDR
Mshtml.dll	6.0.2900.3020	23-Oct-2006	15:17	3,055,104	SP2GDR
Mshtmled.dll	6.0.2900.3020	23-Oct-2006	15:17	448,512	SP2GDR
Msrating.dll	6.0.2900.3020	23-Oct-2006	15:17	146,432	SP2GDR
Mstime.dll	6.0.2900.3020	23-Oct-2006	15:17	532,480	SP2GDR
Pngfilt.dll	6.0.2900.3020	23-Oct-2006	15:17	39,424	SP2GDR
Shdocvw.dll	6.0.2900.3020	23-Oct-2006	15:17	1,494,528	SP2GDR
Shlwapi.dll	6.0.2900.3020	23-Oct-2006	15:17	474,112	SP2GDR
Urlmon.dll	6.0.2900.3020	23-Oct-2006	15:17	613,888	SP2GDR
Wininet.dll	6.0.2900.3020	23-Oct-2006	15:17	658,944	SP2GDR
Xpsp3res.dll	5.1.2600.3020	23-Oct-2006	10:47	115,200	SP2GDR
Browseui.dll	6.0.2900.3020	23-Oct-2006	15:34	1,022,976	SP2QFE
Cdfview.dll	6.0.2900.3020	23-Oct-2006	15:34	151,040	SP2QFE
Danim.dll	6.3.1.148	23-Oct-2006	15:34	1,054,208	SP2QFE
Dxtmsft.dll	6.3.2900.3020	23-Oct-2006	15:34	357,888	SP2QFE
Dxtrans.dll	6.3.2900.3020	23-Oct-2006	15:34	205,312	SP2QFE
Extmgr.dll	6.0.2900.3020	23-Oct-2006	15:34	55,808	SP2QFE
Iedw.exe	5.1.2600.3020	23-Oct-2006	11:02	18,432	SP2QFE
Iepeers.dll	6.0.2900.3020	23-Oct-2006	15:34	251,904	SP2QFE
Inseng.dll	6.0.2900.3020	23-Oct-2006	15:34	96,256	SP2QFE
Jsproxy.dll	6.0.2900.3020	23-Oct-2006	15:34	15,872	SP2QFE
Mshtml.dll	6.0.2900.3020	23-Oct-2006	15:34	3,061,248	SP2QFE
Mshtmled.dll	6.0.2900.3020	23-Oct-2006	15:34	448,512	SP2QFE
Msrating.dll	6.0.2900.3020	23-Oct-2006	15:34	146,432	SP2QFE
Mstime.dll	6.0.2900.3020	23-Oct-2006	15:34	532,480	SP2QFE
Pngfilt.dll	6.0.2900.3020	23-Oct-2006	15:34	39,424	SP2QFE
Shdocvw.dll	6.0.2900.3020	23-Oct-2006	15:34	1,497,600	SP2QFE
Shlwapi.dll	6.0.2900.3020	23-Oct-2006	15:34	474,112	SP2QFE
Urlmon.dll	6.0.2900.3020	23-Oct-2006	15:34	615,936	SP2QFE
Wininet.dll	6.0.2900.3020	23-Oct-2006	15:34	664,576	SP2QFE
Xpsp3res.dll	5.1.2600.3020	23-Oct-2006	11:01	248,320	SP2QFE

Windows XP Professional x64:

File Name	Version	Date	Time	Size	CPU	Folder
Browseui.dll	6.0.3790.2817	18-Nov-2006	09:22	1,604,608	x64	SP1GDR
Danim.dll	6.3.1.148	18-Nov-2006	09:22	1,989,120	x64	SP1GDR
Dxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:22	561,664	x64	SP1GDR
Dxtrans.dll	6.3.3790.2817	18-Nov-2006	09:22	332,288	x64	SP1GDR
Iepeers.dll	6.0.3790.2817	18-Nov-2006	09:22	369,664	x64	SP1GDR
Jsproxy.dll	6.0.3790.2817	18-Nov-2006	09:22	24,064	x64	SP1GDR
Mshtml.dll	6.0.3790.2817	18-Nov-2006	09:22	5,995,520	x64	SP1GDR
Mstime.dll	6.0.3790.2817	18-Nov-2006	09:22	900,608	x64	SP1GDR
Pngfilt.dll	5.2.3790.2817	18-Nov-2006	09:22	64,000	x64	SP1GDR
Shdocvw.dll	6.0.3790.2817	18-Nov-2006	09:22	2,437,632	x64	SP1GDR
Shlwapi.dll	6.0.3790.2817	18-Nov-2006	09:22	621,568	x64	SP1GDR
Urlmon.dll	6.0.3790.2817	18-Nov-2006	09:22	1,083,904	x64	SP1GDR
W03a2409.dll	5.2.3790.2817	18-Nov-2006	09:22	4,608	x64	SP1GDR
Wininet.dll	6.0.3790.2817	18-Nov-2006	09:23	1,187,840	x64	SP1GDR
Wbrowseui.dll	6.0.3790.2817	18-Nov-2006	09:23	1,036,800	x86	SP1GDR\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:23	1,058,304	x86	SP1GDR\WOW
Wdxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:23	363,008	x86	SP1GDR\WOW
Wdxtrans.dll	6.3.3790.2817	18-Nov-2006	09:23	212,480	x86	SP1GDR\WOW
Wiedw.exe	5.2.3790.2817	18-Nov-2006	09:23	17,920	x86	SP1GDR\WOW
Wiepeers.dll	6.0.3790.2817	18-Nov-2006	09:23	253,952	x86	SP1GDR\WOW
Wjsproxy.dll	6.0.3790.2817	18-Nov-2006	09:23	16,384	x86	SP1GDR\WOW
Wmshtml.dll	6.0.3790.2817	18-Nov-2006	09:23	3,153,920	x86	SP1GDR\WOW
Wmstime.dll	6.0.3790.2817	18-Nov-2006	09:23	537,088	x86	SP1GDR\WOW
Wpngfilt.dll	5.2.3790.2817	18-Nov-2006	09:23	42,496	x86	SP1GDR\WOW
Wshdocvw.dll	6.0.3790.2817	18-Nov-2006	09:23	1,514,496	x86	SP1GDR\WOW
Wshlwapi.dll	6.0.3790.2817	18-Nov-2006	09:23	321,536	x86	SP1GDR\WOW
Wurlmon.dll	6.0.3790.2817	18-Nov-2006	09:23	696,320	x86	SP1GDR\WOW
Ww03a2409.dll	5.2.3790.2817	18-Nov-2006	09:23	4,096	x86	SP1GDR\WOW
Wwininet.dll	6.0.3790.2817	18-Nov-2006	09:23	662,528	x86	SP1GDR\WOW
Browseui.dll	6.0.3790.2817	18-Nov-2006	09:13	1,604,608	x64	SP1QFE
Danim.dll	6.3.1.148	18-Nov-2006	09:13	1,989,120	x64	SP1QFE
Dxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:13	561,664	x64	SP1QFE
Dxtrans.dll	6.3.3790.2817	18-Nov-2006	09:13	332,288	x64	SP1QFE
Iepeers.dll	6.0.3790.2817	18-Nov-2006	09:13	370,176	x64	SP1QFE
Jsproxy.dll	6.0.3790.2817	18-Nov-2006	09:13	24,064	x64	SP1QFE
Mshtml.dll	6.0.3790.2817	18-Nov-2006	09:13	5,998,592	x64	SP1QFE
Mstime.dll	6.0.3790.2817	18-Nov-2006	09:13	900,608	x64	SP1QFE
Pngfilt.dll	5.2.3790.2817	18-Nov-2006	09:13	64,000	x64	SP1QFE
Shdocvw.dll	6.0.3790.2817	18-Nov-2006	09:13	2,438,656	x64	SP1QFE
Shlwapi.dll	6.0.3790.2817	18-Nov-2006	09:14	621,568	x64	SP1QFE
Urlmon.dll	6.0.3790.2817	18-Nov-2006	09:14	1,083,904	x64	SP1QFE
W03a2409.dll	5.2.3790.2817	18-Nov-2006	09:14	27,648	x64	SP1QFE
Wininet.dll	6.0.3790.2817	18-Nov-2006	09:14	1,189,888	x64	SP1QFE
Wbrowseui.dll	6.0.3790.2817	18-Nov-2006	09:14	1,036,800	x86	SP1QFE\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:14	1,058,304	x86	SP1QFE\WOW
Wdxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:14	363,008	x86	SP1QFE\WOW
Wdxtrans.dll	6.3.3790.2817	18-Nov-2006	09:14	212,480	x86	SP1QFE\WOW
Wiedw.exe	5.2.3790.2817	18-Nov-2006	09:14	17,920	x86	SP1QFE\WOW
Wiepeers.dll	6.0.3790.2817	18-Nov-2006	09:14	253,952	x86	SP1QFE\WOW
Wjsproxy.dll	6.0.3790.2817	18-Nov-2006	09:14	16,384	x86	SP1QFE\WOW
Wmshtml.dll	6.0.3790.2817	18-Nov-2006	09:14	3,156,992	x86	SP1QFE\WOW
Wmstime.dll	6.0.3790.2817	18-Nov-2006	09:14	537,088	x86	SP1QFE\WOW
Wpngfilt.dll	5.2.3790.2817	18-Nov-2006	09:14	42,496	x86	SP1QFE\WOW
Wshdocvw.dll	6.0.3790.2817	18-Nov-2006	09:14	1,515,520	x86	SP1QFE\WOW
Wshlwapi.dll	6.0.3790.2817	18-Nov-2006	09:14	321,536	x86	SP1QFE\WOW
Wurlmon.dll	6.0.3790.2817	18-Nov-2006	09:14	696,832	x86	SP1QFE\WOW
Ww03a2409.dll	5.2.3790.2817	18-Nov-2006	09:14	27,136	x86	SP1QFE\WOW
Wwininet.dll	6.0.3790.2817	18-Nov-2006	09:14	665,600	x86	SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

If you have previously installed a hotfix to update one of these files, the installer copies the RTMQFE, SP1QFE, or SP2QFE files to your system. Otherwise, the installer copies the RTMGDR, SP1GDR, or SP2GDR files to your system. Security updates may not contain all variations of these files. For more information about this behavior, see Microsoft Knowledge Base Article 824994.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

•	Microsoft Baseline Security Analyzer

•	File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

1.	Click Start, and then click Search.
2.	In the Search Results pane, click All files and folders under Search Companion.
3.	In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
4.	In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
5.	On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

•	Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry keys.

Windows XP Home Edition Service Pack 2, Windows XP Professional Service Pack 2, Windows XP Tablet PC Edition 2005, and Windows XP Media Center Edition 2005:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP\SP3\KB925454\Filelist

Windows XP Professional x64 Edition:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows XP Version 2003\SP2\KB925454\Filelist

Note These registry keys may not contain a complete list of installed files. Also, these registry keys may not be created correctly if an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Top of section

Windows Server 2003 (all versions)

Prerequisites
This security update requires Windows Server 2003 or Windows Server 2003 Service Pack 1.

Note The security updates for Microsoft Windows Server 2003, Microsoft Windows Server 2003 Service Pack 1, and Microsoft Windows Server 2003 x64 Edition also apply to Microsoft Windows Server 2003 R2.

Inclusion in Future Service Packs:
The update for this issue will be included in a future Service Pack or Update Rollup.

Installation Information

This security update supports the following setup switches.

Supported Security Update Installation Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/overwriteoem	Overwrites OEM files without prompting
/nobackup	Does not back up files needed for uninstall
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files
/integrate:path	Integrates the update into the Windows source files. These files are located at the path that is specified in the switch.
/extract[:path]	Extracts files without starting the Setup program
/ER	Enables extended error reporting
/verbose	Enables verbose logging. During installation, creates %Windir%\CabBuild.log. This log details the files that are copied. Using this switch may cause the installation to proceed more slowly.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841. For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

Deployment Information

To install the security update without any user intervention, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb925454-x86-enu /quiet

Note Use of the /quiet switch will suppress all messages. This includes suppressing failure messages. Administrators should use one of the supported methods to verify the installation was successful when they use the /quiet switch. Administrators should also review the KB925454.log file for any failure messages when they use this switch.

To install the security update without forcing the system to restart, use the following command at a command prompt for Windows Server 2003:

Windowsserver2003-kb925454-x86-enu /norestart

Restart Requirement

You must restart your system after you apply this security update.

This security update does not support HotPatching. For more information about HotPatching see Microsoft Knowledge Base Article 897341.

Removal Information

To remove this update, use the Add or Remove Programs tool in Control Panel.

System administrators can also use the Spuninst.exe utility to remove this security update. The Spuninst.exe utility is located in the %Windir%\$NTUninstallKB925454$\Spuninst folder.

Supported Spuninst.exe Switches
Switch	Description
/help	Displays the command-line options
Setup Modes
/passive	Unattended Setup mode. No user interaction is required, but installation status is displayed. If a restart is required at the end of Setup, a dialog box will be presented to the user with a timer warning that the computer will restart in 30 seconds.
/quiet	Quiet mode. This is the same as unattended mode, but no status or error messages are displayed.
Restart Options
/norestart	Does not restart when installation has completed
/forcerestart	Restarts the computer after installation and force other applications to close at shutdown without saving open files first.
/warnrestart[:x]	Presents a dialog box with a timer warning the user that the computer will restart in x seconds. (The default setting is 30 seconds.) Intended for use with the /quiet switch or the /passive switch.
/promptrestart	Display a dialog box prompting the local user to allow a restart
Special Options
/forceappsclose	Forces other programs to close when the computer shuts down
/log:path	Allows the redirection of installation log files

File Information

File Name	Version	Date	Time	Size	Folder
Browseui.dll	6.0.3790.605	23-Oct-2006	16:10	1,057,280	RTMGDR
Cdfview.dll	6.0.3790.605	23-Oct-2006	16:10	147,968	RTMGDR
Danim.dll	6.3.1.148	23-Oct-2006	16:10	993,280	RTMGDR
Digest.dll	6.0.3790.605	23-Oct-2006	16:10	59,904	RTMGDR
Dxtmsft.dll	6.3.3790.605	23-Oct-2006	16:10	351,744	RTMGDR
Dxtrans.dll	6.3.3790.605	23-Oct-2006	16:10	205,312	RTMGDR
Iepeers.dll	6.0.3790.605	23-Oct-2006	16:10	238,592	RTMGDR
Inseng.dll	6.0.3790.605	23-Oct-2006	16:10	73,216	RTMGDR
Jsproxy.dll	6.0.3790.605	23-Oct-2006	16:10	14,848	RTMGDR
Mshtml.dll	6.0.3790.605	23-Oct-2006	16:10	2,937,344	RTMGDR
Mshtmled.dll	6.0.3790.605	23-Oct-2006	16:10	454,144	RTMGDR
Msrating.dll	6.0.3790.605	23-Oct-2006	16:10	135,680	RTMGDR
Mstime.dll	6.0.3790.605	23-Oct-2006	16:10	504,832	RTMGDR
Pngfilt.dll	5.2.3790.605	23-Oct-2006	16:10	40,448	RTMGDR
Shdocvw.dll	6.0.3790.605	23-Oct-2006	16:10	1,398,272	RTMGDR
Shlwapi.dll	6.0.3790.605	23-Oct-2006	16:10	287,744	RTMGDR
Urlmon.dll	6.0.3790.605	23-Oct-2006	16:10	528,384	RTMGDR
Wininet.dll	6.0.3790.605	23-Oct-2006	16:10	626,688	RTMGDR
Browseui.dll	6.0.3790.605	23-Oct-2006	16:04	1,057,280	RTMQFE
Cdfview.dll	6.0.3790.605	23-Oct-2006	16:04	147,968	RTMQFE
Danim.dll	6.3.1.148	23-Oct-2006	16:04	993,280	RTMQFE
Digest.dll	6.0.3790.605	23-Oct-2006	16:04	59,904	RTMQFE
Dxtmsft.dll	6.3.3790.605	23-Oct-2006	16:04	352,256	RTMQFE
Dxtrans.dll	6.3.3790.605	23-Oct-2006	16:04	205,312	RTMQFE
Iepeers.dll	6.0.3790.605	23-Oct-2006	16:04	239,104	RTMQFE
Inseng.dll	6.0.3790.605	23-Oct-2006	16:04	73,216	RTMQFE
Jsproxy.dll	6.0.3790.605	23-Oct-2006	16:04	14,848	RTMQFE
Mshtml.dll	6.0.3790.605	23-Oct-2006	16:04	2,939,904	RTMQFE
Mshtmled.dll	6.0.3790.605	23-Oct-2006	16:04	454,144	RTMQFE
Msrating.dll	6.0.3790.605	23-Oct-2006	16:04	135,680	RTMQFE
Mstime.dll	6.0.3790.605	23-Oct-2006	16:04	504,832	RTMQFE
Pngfilt.dll	5.2.3790.605	23-Oct-2006	16:04	40,448	RTMQFE
Shdocvw.dll	6.0.3790.605	23-Oct-2006	16:04	1,399,808	RTMQFE
Shlwapi.dll	6.0.3790.605	23-Oct-2006	16:04	287,744	RTMQFE
Urlmon.dll	6.0.3790.605	23-Oct-2006	16:04	528,384	RTMQFE
Wininet.dll	6.0.3790.605	23-Oct-2006	16:04	631,296	RTMQFE
Browseui.dll	6.0.3790.2817	23-Oct-2006	16:41	1,036,800	SP1GDR
Danim.dll	6.3.1.148	23-Oct-2006	16:41	1,058,304	SP1GDR
Dxtmsft.dll	6.3.3790.2817	23-Oct-2006	16:41	363,008	SP1GDR
Dxtrans.dll	6.3.3790.2817	23-Oct-2006	16:41	212,480	SP1GDR
Iedw.exe	5.2.3790.2817	23-Oct-2006	12:10	17,920	SP1GDR
Iepeers.dll	6.0.3790.2817	23-Oct-2006	16:41	253,952	SP1GDR
Jsproxy.dll	6.0.3790.2817	23-Oct-2006	16:41	16,384	SP1GDR
Mshtml.dll	6.0.3790.2817	23-Oct-2006	16:41	3,153,920	SP1GDR
Mstime.dll	6.0.3790.2817	23-Oct-2006	16:41	537,088	SP1GDR
Pngfilt.dll	5.2.3790.2817	23-Oct-2006	16:41	42,496	SP1GDR
Shdocvw.dll	6.0.3790.2817	01-Nov-2006	11:07	1,514,496	SP1GDR
Shlwapi.dll	6.0.3790.2817	23-Oct-2006	16:41	321,536	SP1GDR
Urlmon.dll	6.0.3790.2817	23-Oct-2006	16:41	696,320	SP1GDR
W03a2409.dll	5.2.3790.2817	23-Oct-2006	11:54	4,096	SP1GDR
Wininet.dll	6.0.3790.2817	23-Oct-2006	16:41	662,528	SP1GDR
Browseui.dll	6.0.3790.2817	23-Oct-2006	16:50	1,036,800	SP1QFE
Danim.dll	6.3.1.148	23-Oct-2006	16:50	1,058,304	SP1QFE
Dxtmsft.dll	6.3.3790.2817	23-Oct-2006	16:50	363,008	SP1QFE
Dxtrans.dll	6.3.3790.2817	23-Oct-2006	16:50	212,480	SP1QFE
Iedw.exe	5.2.3790.2817	23-Oct-2006	13:16	17,920	SP1QFE
Iepeers.dll	6.0.3790.2817	23-Oct-2006	16:50	253,952	SP1QFE
Jsproxy.dll	6.0.3790.2817	23-Oct-2006	16:50	16,384	SP1QFE
Mshtml.dll	6.0.3790.2817	23-Oct-2006	16:50	3,156,992	SP1QFE
Mstime.dll	6.0.3790.2817	23-Oct-2006	16:50	537,088	SP1QFE
Pngfilt.dll	5.2.3790.2817	23-Oct-2006	16:50	42,496	SP1QFE
Shdocvw.dll	6.0.3790.2817	23-Oct-2006	16:50	1,515,520	SP1QFE
Shlwapi.dll	6.0.3790.2817	23-Oct-2006	16:50	321,536	SP1QFE
Urlmon.dll	6.0.3790.2817	23-Oct-2006	16:50	696,832	SP1QFE
W03a2409.dll	5.2.3790.2817	23-Oct-2006	12:57	27,136	SP1QFE
Wininet.dll	6.0.3790.2817	23-Oct-2006	16:50	665,600	SP1QFE

Windows Server, 2003 Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; and Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems:

File Name	Version	Date	Time	Size	CPU	Folder
Browseui.dll	6.0.3790.605	18-Nov-2006	09:20	2,536,960	IA-64	RTMGDR
Cdfview.dll	6.0.3790.605	18-Nov-2006	09:20	303,616	IA-64	RTMGDR
Digest.dll	6.0.3790.605	18-Nov-2006	09:20	141,312	IA-64	RTMGDR
Dxtmsft.dll	6.3.3790.605	18-Nov-2006	09:20	940,032	IA-64	RTMGDR
Dxtrans.dll	6.3.3790.605	18-Nov-2006	09:20	585,728	IA-64	RTMGDR
Iepeers.dll	6.0.3790.605	18-Nov-2006	09:20	675,840	IA-64	RTMGDR
Inseng.dll	6.0.3790.605	18-Nov-2006	09:20	217,600	IA-64	RTMGDR
Jsproxy.dll	6.0.3790.605	18-Nov-2006	09:20	36,864	IA-64	RTMGDR
Mshtml.dll	6.0.3790.605	18-Nov-2006	09:20	8,250,880	IA-64	RTMGDR
Mshtmled.dll	6.0.3790.605	18-Nov-2006	09:21	1,409,536	IA-64	RTMGDR
Msrating.dll	6.0.3790.605	18-Nov-2006	09:21	387,584	IA-64	RTMGDR
Mstime.dll	6.0.3790.605	18-Nov-2006	09:21	1,666,560	IA-64	RTMGDR
Pngfilt.dll	5.2.3790.605	18-Nov-2006	09:21	105,984	IA-64	RTMGDR
Shdocvw.dll	6.0.3790.605	18-Nov-2006	09:21	3,375,616	IA-64	RTMGDR
Shlwapi.dll	6.0.3790.605	18-Nov-2006	09:21	740,352	IA-64	RTMGDR
Urlmon.dll	6.0.3790.605	18-Nov-2006	09:21	1,302,016	IA-64	RTMGDR
Wininet.dll	6.0.3790.605	18-Nov-2006	09:21	1,506,304	IA-64	RTMGDR
Wbrowseui.dll	6.0.3790.605	18-Nov-2006	09:21	1,057,280	x86	RTMGDR\WOW
Wcdfview.dll	6.0.3790.605	18-Nov-2006	09:21	147,968	x86	RTMGDR\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:21	993,280	x86	RTMGDR\WOW
Wdxtmsft.dll	6.3.3790.605	18-Nov-2006	09:21	351,744	x86	RTMGDR\WOW
Wdxtrans.dll	6.3.3790.605	18-Nov-2006	09:21	205,312	x86	RTMGDR\WOW
Wiepeers.dll	6.0.3790.605	18-Nov-2006	09:21	238,592	x86	RTMGDR\WOW
Winseng.dll	6.0.3790.605	18-Nov-2006	09:21	73,216	x86	RTMGDR\WOW
Wjsproxy.dll	6.0.3790.605	18-Nov-2006	09:21	14,848	x86	RTMGDR\WOW
Wmshtml.dll	6.0.3790.605	18-Nov-2006	09:21	2,937,344	x86	RTMGDR\WOW
Wmshtmled.dll	6.0.3790.605	18-Nov-2006	09:21	454,144	x86	RTMGDR\WOW
Wmsrating.dll	6.0.3790.605	18-Nov-2006	09:21	135,680	x86	RTMGDR\WOW
Wmstime.dll	6.0.3790.605	18-Nov-2006	09:21	504,832	x86	RTMGDR\WOW
Wpngfilt.dll	5.2.3790.605	18-Nov-2006	09:21	40,448	x86	RTMGDR\WOW
Wshdocvw.dll	6.0.3790.605	18-Nov-2006	09:21	1,398,272	x86	RTMGDR\WOW
Wshlwapi.dll	6.0.3790.605	18-Nov-2006	09:21	287,744	x86	RTMGDR\WOW
Wurlmon.dll	6.0.3790.605	18-Nov-2006	09:21	528,384	x86	RTMGDR\WOW
Wwdigest.dll	6.0.3790.605	18-Nov-2006	09:21	59,904	x86	RTMGDR\WOW
Wwininet.dll	6.0.3790.605	18-Nov-2006	09:21	626,688	x86	RTMGDR\WOW
Browseui.dll	6.0.3790.605	18-Nov-2006	09:20	2,538,496	IA-64	RTMQFE
Cdfview.dll	6.0.3790.605	18-Nov-2006	09:20	303,616	IA-64	RTMQFE
Digest.dll	6.0.3790.605	18-Nov-2006	09:20	141,312	IA-64	RTMQFE
Dxtmsft.dll	6.3.3790.605	18-Nov-2006	09:20	941,056	IA-64	RTMQFE
Dxtrans.dll	6.3.3790.605	18-Nov-2006	09:20	586,752	IA-64	RTMQFE
Iepeers.dll	6.0.3790.605	18-Nov-2006	09:20	678,912	IA-64	RTMQFE
Inseng.dll	6.0.3790.605	18-Nov-2006	09:20	217,600	IA-64	RTMQFE
Jsproxy.dll	6.0.3790.605	18-Nov-2006	09:20	36,864	IA-64	RTMQFE
Mshtml.dll	6.0.3790.605	18-Nov-2006	09:20	8,255,488	IA-64	RTMQFE
Mshtmled.dll	6.0.3790.605	18-Nov-2006	09:20	1,409,536	IA-64	RTMQFE
Msrating.dll	6.0.3790.605	18-Nov-2006	09:20	387,584	IA-64	RTMQFE
Mstime.dll	6.0.3790.605	18-Nov-2006	09:20	1,666,560	IA-64	RTMQFE
Pngfilt.dll	5.2.3790.605	18-Nov-2006	09:21	105,984	IA-64	RTMQFE
Shdocvw.dll	6.0.3790.605	18-Nov-2006	09:21	3,381,760	IA-64	RTMQFE
Shlwapi.dll	6.0.3790.605	18-Nov-2006	09:21	740,352	IA-64	RTMQFE
Urlmon.dll	6.0.3790.605	18-Nov-2006	09:21	1,302,016	IA-64	RTMQFE
Wininet.dll	6.0.3790.605	18-Nov-2006	09:21	1,519,616	IA-64	RTMQFE
Wbrowseui.dll	6.0.3790.605	18-Nov-2006	09:21	1,057,280	x86	RTMQFE\WOW
Wcdfview.dll	6.0.3790.605	18-Nov-2006	09:21	147,968	x86	RTMQFE\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:21	993,280	x86	RTMQFE\WOW
Wdxtmsft.dll	6.3.3790.605	18-Nov-2006	09:21	352,256	x86	RTMQFE\WOW
Wdxtrans.dll	6.3.3790.605	18-Nov-2006	09:21	205,312	x86	RTMQFE\WOW
Wiepeers.dll	6.0.3790.605	18-Nov-2006	09:21	239,104	x86	RTMQFE\WOW
Winseng.dll	6.0.3790.605	18-Nov-2006	09:21	73,216	x86	RTMQFE\WOW
Wjsproxy.dll	6.0.3790.605	18-Nov-2006	09:21	14,848	x86	RTMQFE\WOW
Wmshtml.dll	6.0.3790.605	18-Nov-2006	09:21	2,939,904	x86	RTMQFE\WOW
Wmshtmled.dll	6.0.3790.605	18-Nov-2006	09:21	454,144	x86	RTMQFE\WOW
Wmsrating.dll	6.0.3790.605	18-Nov-2006	09:21	135,680	x86	RTMQFE\WOW
Wmstime.dll	6.0.3790.605	18-Nov-2006	09:21	504,832	x86	RTMQFE\WOW
Wpngfilt.dll	5.2.3790.605	18-Nov-2006	09:21	40,448	x86	RTMQFE\WOW
Wshdocvw.dll	6.0.3790.605	18-Nov-2006	09:21	1,399,808	x86	RTMQFE\WOW
Wshlwapi.dll	6.0.3790.605	18-Nov-2006	09:21	287,744	x86	RTMQFE\WOW
Wurlmon.dll	6.0.3790.605	18-Nov-2006	09:21	528,384	x86	RTMQFE\WOW
Wwdigest.dll	6.0.3790.605	18-Nov-2006	09:21	59,904	x86	RTMQFE\WOW
Wwininet.dll	6.0.3790.605	18-Nov-2006	09:21	631,296	x86	RTMQFE\WOW
Browseui.dll	6.0.3790.2817	18-Nov-2006	09:25	2,542,080	IA-64	SP1GDR
Dxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:25	1,009,152	IA-64	SP1GDR
Dxtrans.dll	6.3.3790.2817	18-Nov-2006	09:25	640,512	IA-64	SP1GDR
Iepeers.dll	6.0.3790.2817	18-Nov-2006	09:25	717,312	IA-64	SP1GDR
Jsproxy.dll	6.0.3790.2817	18-Nov-2006	09:25	45,568	IA-64	SP1GDR
Mshtml.dll	6.0.3790.2817	18-Nov-2006	09:25	9,361,408	IA-64	SP1GDR
Mstime.dll	6.0.3790.2817	18-Nov-2006	09:26	1,845,760	IA-64	SP1GDR
Pngfilt.dll	5.2.3790.2817	18-Nov-2006	09:26	116,736	IA-64	SP1GDR
Shdocvw.dll	6.0.3790.2817	18-Nov-2006	09:26	3,678,208	IA-64	SP1GDR
Shlwapi.dll	6.0.3790.2817	18-Nov-2006	09:26	823,296	IA-64	SP1GDR
Urlmon.dll	6.0.3790.2817	18-Nov-2006	09:26	1,613,312	IA-64	SP1GDR
W03a2409.dll	5.2.3790.2817	18-Nov-2006	09:26	3,072	IA-64	SP1GDR
Wininet.dll	6.0.3790.2817	18-Nov-2006	09:26	1,695,232	IA-64	SP1GDR
Wbrowseui.dll	6.0.3790.2817	18-Nov-2006	09:26	1,036,800	x86	SP1GDR\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:26	1,058,304	x86	SP1GDR\WOW
Wdxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:26	363,008	x86	SP1GDR\WOW
Wdxtrans.dll	6.3.3790.2817	18-Nov-2006	09:26	212,480	x86	SP1GDR\WOW
Wiedw.exe	5.2.3790.2817	18-Nov-2006	09:26	17,920	x86	SP1GDR\WOW
Wiepeers.dll	6.0.3790.2817	18-Nov-2006	09:26	253,952	x86	SP1GDR\WOW
Wjsproxy.dll	6.0.3790.2817	18-Nov-2006	09:26	16,384	x86	SP1GDR\WOW
Wmshtml.dll	6.0.3790.2817	18-Nov-2006	09:26	3,153,920	x86	SP1GDR\WOW
Wmstime.dll	6.0.3790.2817	18-Nov-2006	09:26	537,088	x86	SP1GDR\WOW
Wpngfilt.dll	5.2.3790.2817	18-Nov-2006	09:26	42,496	x86	SP1GDR\WOW
Wshdocvw.dll	6.0.3790.2817	18-Nov-2006	09:26	1,514,496	x86	SP1GDR\WOW
Wshlwapi.dll	6.0.3790.2817	18-Nov-2006	09:26	321,536	x86	SP1GDR\WOW
Wurlmon.dll	6.0.3790.2817	18-Nov-2006	09:26	696,320	x86	SP1GDR\WOW
Ww03a2409.dll	5.2.3790.2817	18-Nov-2006	09:26	4,096	x86	SP1GDR\WOW
Wwininet.dll	6.0.3790.2817	18-Nov-2006	09:26	662,528	x86	SP1GDR\WOW
Browseui.dll	6.0.3790.2817	18-Nov-2006	09:20	2,541,568	IA-64	SP1QFE
Dxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:20	1,009,152	IA-64	SP1QFE
Dxtrans.dll	6.3.3790.2817	18-Nov-2006	09:20	640,512	IA-64	SP1QFE
Iepeers.dll	6.0.3790.2817	18-Nov-2006	09:20	717,824	IA-64	SP1QFE
Jsproxy.dll	6.0.3790.2817	18-Nov-2006	09:20	45,568	IA-64	SP1QFE
Mshtml.dll	6.0.3790.2817	18-Nov-2006	09:20	9,368,064	IA-64	SP1QFE
Mstime.dll	6.0.3790.2817	18-Nov-2006	09:21	1,845,760	IA-64	SP1QFE
Pngfilt.dll	5.2.3790.2817	18-Nov-2006	09:21	116,736	IA-64	SP1QFE
Shdocvw.dll	6.0.3790.2817	18-Nov-2006	09:21	3,679,232	IA-64	SP1QFE
Shlwapi.dll	6.0.3790.2817	18-Nov-2006	09:21	823,296	IA-64	SP1QFE
Urlmon.dll	6.0.3790.2817	18-Nov-2006	09:21	1,614,336	IA-64	SP1QFE
W03a2409.dll	5.2.3790.2817	18-Nov-2006	09:21	26,112	IA-64	SP1QFE
Wininet.dll	6.0.3790.2817	18-Nov-2006	09:21	1,701,376	IA-64	SP1QFE
Wbrowseui.dll	6.0.3790.2817	18-Nov-2006	09:21	1,036,800	x86	SP1QFE\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:21	1,058,304	x86	SP1QFE\WOW
Wdxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:21	363,008	x86	SP1QFE\WOW
Wdxtrans.dll	6.3.3790.2817	18-Nov-2006	09:21	212,480	x86	SP1QFE\WOW
Wiedw.exe	5.2.3790.2817	18-Nov-2006	09:21	17,920	x86	SP1QFE\WOW
Wiepeers.dll	6.0.3790.2817	18-Nov-2006	09:21	253,952	x86	SP1QFE\WOW
Wjsproxy.dll	6.0.3790.2817	18-Nov-2006	09:21	16,384	x86	SP1QFE\WOW
Wmshtml.dll	6.0.3790.2817	18-Nov-2006	09:21	3,156,992	x86	SP1QFE\WOW
Wmstime.dll	6.0.3790.2817	18-Nov-2006	09:21	537,088	x86	SP1QFE\WOW
Wpngfilt.dll	5.2.3790.2817	18-Nov-2006	09:21	42,496	x86	SP1QFE\WOW
Wshdocvw.dll	6.0.3790.2817	18-Nov-2006	09:21	1,515,520	x86	SP1QFE\WOW
Wshlwapi.dll	6.0.3790.2817	18-Nov-2006	09:21	321,536	x86	SP1QFE\WOW
Wurlmon.dll	6.0.3790.2817	18-Nov-2006	09:21	696,832	x86	SP1QFE\WOW
Ww03a2409.dll	5.2.3790.2817	18-Nov-2006	09:21	27,136	x86	SP1QFE\WOW
Wwininet.dll	6.0.3790.2817	18-Nov-2006	09:21	665,600	x86	SP1QFE\WOW

Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

File Name	Version	Date	Time	Size	CPU	Folder
Browseui.dll	6.0.3790.2817	18-Nov-2006	09:22	1,604,608	x64	SP1GDR
Danim.dll	6.3.1.148	18-Nov-2006	09:22	1,989,120	x64	SP1GDR
Dxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:22	561,664	x64	SP1GDR
Dxtrans.dll	6.3.3790.2817	18-Nov-2006	09:22	332,288	x64	SP1GDR
Iepeers.dll	6.0.3790.2817	18-Nov-2006	09:22	369,664	x64	SP1GDR
Jsproxy.dll	6.0.3790.2817	18-Nov-2006	09:22	24,064	x64	SP1GDR
Mshtml.dll	6.0.3790.2817	18-Nov-2006	09:22	5,995,520	x64	SP1GDR
Mstime.dll	6.0.3790.2817	18-Nov-2006	09:22	900,608	x64	SP1GDR
Pngfilt.dll	5.2.3790.2817	18-Nov-2006	09:22	64,000	x64	SP1GDR
Shdocvw.dll	6.0.3790.2817	18-Nov-2006	09:22	2,437,632	x64	SP1GDR
Shlwapi.dll	6.0.3790.2817	18-Nov-2006	09:22	621,568	x64	SP1GDR
Urlmon.dll	6.0.3790.2817	18-Nov-2006	09:22	1,083,904	x64	SP1GDR
W03a2409.dll	5.2.3790.2817	18-Nov-2006	09:22	4,608	x64	SP1GDR
Wininet.dll	6.0.3790.2817	18-Nov-2006	09:23	1,187,840	x64	SP1GDR
Wbrowseui.dll	6.0.3790.2817	18-Nov-2006	09:23	1,036,800	x86	SP1GDR\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:23	1,058,304	x86	SP1GDR\WOW
Wdxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:23	363,008	x86	SP1GDR\WOW
Wdxtrans.dll	6.3.3790.2817	18-Nov-2006	09:23	212,480	x86	SP1GDR\WOW
Wiedw.exe	5.2.3790.2817	18-Nov-2006	09:23	17,920	x86	SP1GDR\WOW
Wiepeers.dll	6.0.3790.2817	18-Nov-2006	09:23	253,952	x86	SP1GDR\WOW
Wjsproxy.dll	6.0.3790.2817	18-Nov-2006	09:23	16,384	x86	SP1GDR\WOW
Wmshtml.dll	6.0.3790.2817	18-Nov-2006	09:23	3,153,920	x86	SP1GDR\WOW
Wmstime.dll	6.0.3790.2817	18-Nov-2006	09:23	537,088	x86	SP1GDR\WOW
Wpngfilt.dll	5.2.3790.2817	18-Nov-2006	09:23	42,496	x86	SP1GDR\WOW
Wshdocvw.dll	6.0.3790.2817	18-Nov-2006	09:23	1,514,496	x86	SP1GDR\WOW
Wshlwapi.dll	6.0.3790.2817	18-Nov-2006	09:23	321,536	x86	SP1GDR\WOW
Wurlmon.dll	6.0.3790.2817	18-Nov-2006	09:23	696,320	x86	SP1GDR\WOW
Ww03a2409.dll	5.2.3790.2817	18-Nov-2006	09:23	4,096	x86	SP1GDR\WOW
Wwininet.dll	6.0.3790.2817	18-Nov-2006	09:23	662,528	x86	SP1GDR\WOW
Browseui.dll	6.0.3790.2817	18-Nov-2006	09:13	1,604,608	x64	SP1QFE
Danim.dll	6.3.1.148	18-Nov-2006	09:13	1,989,120	x64	SP1QFE
Dxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:13	561,664	x64	SP1QFE
Dxtrans.dll	6.3.3790.2817	18-Nov-2006	09:13	332,288	x64	SP1QFE
Iepeers.dll	6.0.3790.2817	18-Nov-2006	09:13	370,176	x64	SP1QFE
Jsproxy.dll	6.0.3790.2817	18-Nov-2006	09:13	24,064	x64	SP1QFE
Mshtml.dll	6.0.3790.2817	18-Nov-2006	09:13	5,998,592	x64	SP1QFE
Mstime.dll	6.0.3790.2817	18-Nov-2006	09:13	900,608	x64	SP1QFE
Pngfilt.dll	5.2.3790.2817	18-Nov-2006	09:13	64,000	x64	SP1QFE
Shdocvw.dll	6.0.3790.2817	18-Nov-2006	09:13	2,438,656	x64	SP1QFE
Shlwapi.dll	6.0.3790.2817	18-Nov-2006	09:14	621,568	x64	SP1QFE
Urlmon.dll	6.0.3790.2817	18-Nov-2006	09:14	1,083,904	x64	SP1QFE
W03a2409.dll	5.2.3790.2817	18-Nov-2006	09:14	27,648	x64	SP1QFE
Wininet.dll	6.0.3790.2817	18-Nov-2006	09:14	1,189,888	x64	SP1QFE
Wbrowseui.dll	6.0.3790.2817	18-Nov-2006	09:14	1,036,800	x86	SP1QFE\WOW
Wdanim.dll	6.3.1.148	18-Nov-2006	09:14	1,058,304	x86	SP1QFE\WOW
Wdxtmsft.dll	6.3.3790.2817	18-Nov-2006	09:14	363,008	x86	SP1QFE\WOW
Wdxtrans.dll	6.3.3790.2817	18-Nov-2006	09:14	212,480	x86	SP1QFE\WOW
Wiedw.exe	5.2.3790.2817	18-Nov-2006	09:14	17,920	x86	SP1QFE\WOW
Wiepeers.dll	6.0.3790.2817	18-Nov-2006	09:14	253,952	x86	SP1QFE\WOW
Wjsproxy.dll	6.0.3790.2817	18-Nov-2006	09:14	16,384	x86	SP1QFE\WOW
Wmshtml.dll	6.0.3790.2817	18-Nov-2006	09:14	3,156,992	x86	SP1QFE\WOW
Wmstime.dll	6.0.3790.2817	18-Nov-2006	09:14	537,088	x86	SP1QFE\WOW
Wpngfilt.dll	5.2.3790.2817	18-Nov-2006	09:14	42,496	x86	SP1QFE\WOW
Wshdocvw.dll	6.0.3790.2817	18-Nov-2006	09:14	1,515,520	x86	SP1QFE\WOW
Wshlwapi.dll	6.0.3790.2817	18-Nov-2006	09:14	321,536	x86	SP1QFE\WOW
Wurlmon.dll	6.0.3790.2817	18-Nov-2006	09:14	696,832	x86	SP1QFE\WOW
Ww03a2409.dll	5.2.3790.2817	18-Nov-2006	09:14	27,136	x86	SP1QFE\WOW
Wwininet.dll	6.0.3790.2817	18-Nov-2006	09:14	665,600	x86	SP1QFE\WOW

Notes When you install these security updates, the installer checks to see if one or more of the files that are being updated on your system have previously been updated by a Microsoft hotfix.

For more information about the Update.exe installer, visit the Microsoft TechNet Web site.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

Verifying that the Update Has Been Applied

•	Microsoft Baseline Security Analyzer

•	File Version Verification

Note Because there are several versions of Microsoft Windows, the following steps may be different on your computer. If they are, see your product documentation to complete these steps.

1.	Click Start, and then click Search.
2.	In the Search Results pane, click All files and folders under Search Companion.
3.	In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
4.	In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
5.	On the Version tab, determine the version of the file that is installed on your computer by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

•	Registry Key Verification

You may also be able to verify the files that this security update has installed by reviewing the following registry key.

Windows Server 2003, Web Edition; Windows Server 2003, Standard Edition; Windows Server 2003, Datacenter Edition; Windows Server 2003, Enterprise Edition; Windows Small Business Server 2003; Windows Server 2003, Web Edition with SP1; Windows Server 2003, Standard Edition with SP1; Windows Server 2003, Enterprise Edition with SP1; Windows Server 2003, Datacenter Edition with SP1; Windows Server 2003 R2, Web Edition; Windows Server 2003 R2, Standard Edition; Windows Server 2003 R2, Datacenter Edition; Windows Server 2003 R2, Enterprise Edition; Windows Small Business Server 2003 R2; Windows Server 2003, Enterprise Edition for Itanium-based Systems; Windows Server 2003, Datacenter Edition for Itanium-based Systems; Windows Server 2003, Enterprise Edition with SP1 for Itanium-based Systems; Windows Server 2003, Datacenter Edition with SP1 for Itanium-based Systems; Windows Server 2003, Standard x64 Edition; Windows Server 2003, Enterprise x64 Edition; and Windows Server 2003, Datacenter x64 Edition; Windows Server 2003 R2, Standard x64 Edition; Windows Server 2003 R2, Enterprise x64 Edition; and Windows Server 2003 R2, Datacenter x64 Edition:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\Windows Server 2003\SP2\KB925454\Filelist

Note This registry key may not contain a complete list of installed files. Also, this registry key may not be created correctly if an administrator or an OEM integrates or slipstreams the 925454 security update into the Windows installation source files.

Top of section

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

•	Jakob Balle and Carsten Eiram of Secunia Research for reporting the Script Error Handling Memory Corruption Vulnerability (CVE-2006-5579)
•	Sam Thomas, working with TippingPoint and the Zero Day Initiative, for reporting the DHTML Script Function Memory Corruption Vulnerability (CVE-2006-5581)
•	Yorick Koster of ITsec Security Services for reporting the TIF Folder Information Disclosure Vulnerability (CVE-2006-5578)

Obtaining Other Security Updates:

Updates for other security issues are available at the following locations:

•	Security updates are available at the Microsoft Download Center. You can find them most easily by doing a keyword search for "security_patch."
•	Updates for consumer platforms are available at the Microsoft Update Web site.

Support:

•	Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.
•	International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Security Resources:

•	The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.
•	TechNet Update Management Center
•	Microsoft Software Update Services
•	Microsoft Windows Server Update Services
•	Microsoft Baseline Security Analyzer (MBSA)
•	Windows Update
•	Microsoft Update
•	Windows Update Catalog: For more information about the Windows Update Catalog, see Microsoft Knowledge Base Article 323166.
•	Office Update

Software Update Services:

By using Microsoft Software Update Services (SUS), administrators can quickly and reliably deploy the latest critical updates and security updates to Windows 2000 and Windows Server 2003-based servers, and to desktop systems that are running Windows 2000 Professional or Windows XP Professional.

For more information about how to deploy security updates by using Software Update Services, visit the Software Update Services Web site.

Windows Server Update Services:

By using Windows Server Update Services (WSUS), administrators can quickly and reliably deploy the latest critical updates and security updates for Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000 onto Windows 2000 and later operating systems.

For more information about how to deploy security updates using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server:

Microsoft Systems Management Server (SMS) delivers a highly configurable enterprise solution for managing updates. By using SMS, administrators can identify Windows-based systems that require security updates and can perform controlled deployment of these updates throughout the enterprise with minimal disruption to end users. For more information about how administrators can use SMS 2003 to deploy security updates, visit the SMS 2003 Security Patch Management Web site. SMS 2.0 users can also use Software Updates Service Feature Pack to help deploy security updates. For information about SMS, visit the SMS Web site.

Note SMS uses the Microsoft Baseline Security Analyzer, the Microsoft Office Detection Tool, and the Enterprise Update Scan Tool to provide broad support for security bulletin update detection and deployment. Some software updates may not be detected by these tools. Administrators can use the inventory capabilities of the SMS in these cases to target updates to specific systems. For more information about this procedure, visit the following Web site. Some security updates require administrative rights following a restart of the system. Administrators can use the Elevated Rights Deployment Tool (available in the SMS 2003 Administration Feature Pack and in the SMS 2.0 Administration Feature Pack) to install these updates.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

•	V1.0 (December 12, 2006): Bulletin published.
•	V1.1 (December 14, 2006): Bulletin revised to correct the file manifests for Windows XP Professional x64 Edition, Windows Server 2003 x64 Edition, Windows Server 2003 for Itanium-based Systems, and Windows Server 2003 with SP1 for Itanium-based Systems.

Top of page