This app has a free trial

$1.99
Overview System Requirements Related

Description

Welcome to the myCamera application! The myCamera will help you monitor and control MULTIPLE external FOSCAM MJPEG IP Cameras. The application is designed to interface to external FOSCAM MJPEG IP Cameras, that should be available on your local WiFi network or remotely on the internet (using MYFOSCAM.ORG). For each camera, the user can specify the IP Address, Port Number, Password & User Name and the Camera Model (through the Settings Charm). The myCamera will monitor Sound and Motion Alarms signals from the cameras. The application can Automatically record video when Sound and/or Motion are triggered (user selection). The myCamera will not play sound. The cameras can be operated on the local WiFi network or remotely over the Internet. Make sure to follow these steps: 0. Follow the steps outlined in the FOSCAM manual and set the Camera and the Router 1. Find / Set the Local IP Address and Port number of each camera in your WiFi network 2. Find / Set the User Name, Password for the cameras 3. If interested in remote viewing, Find / Set the DDNS Domain Name of the cameras (on the bottom of the camera body) 4. Identify the Camera Model. 5. Start the myCamera application and activate the Settings Charm (<WINKEY> + I) 6. In the Settings Charm, select the Camera Settings 7. Set the Camera IP address and Port number 8. Set the DDNS Domain Name 9. Set the User Name & Password 10. Select the Local / Remote camera operation 11. Set the Model of the Camera 12. Press the Save button 13. Repeat steps 6-12 for each camera. 14. Press the Refresh button of the myCamera application. 15. The setup is complete and the Camera Page should display the camera video 16. If the camera video is not displayed, try to Reboot the Camera 17. The camera should be ready in about 70 seconds 18. Wait for the camera to complete reboot and then start the myCamera application When switching the camera from one mode to another, I found out that a camera Refresh might be required. Sound/Motion Alarm: Alarm is marked with a RED border around the video image. A test camera was set for you to test your setting. In Camera Setting Page please follow these steps: 1. Set Remote DDNS Domain to: ah7898 2. Select the Remote camera operation 3. Set User Name to: TEST (Case Sensitive) 4. Leave the Password empty 5. As an Operator user, you will not be able to fully operate all the commands on the TEST camera If you have a problem connecting with the camera, please contact us: ytdassoc@gmail.com All data you enter using this application is kept locally only, on your device!

Additional information

Published by

YASIG

Copyright

YASIG Engineering

Developed by

YASIG

Release date

1/22/2013

Approximate size

1.15 MB

Age rating

For all ages

Category

Security

This app can

Access your Internet connection
Access your Internet connection and act as a server.
Access your home or work networks
Use your video library
Microsoft.storeFilter.core.notSupported_8wekyb3d8bbwe

Installation

Get this app while signed in to your Microsoft account and install on up to ten Windows 10 devices.

Language supported

English (United States)


Additional terms

myCamera privacy policy
Terms of transaction
myCamera license terms
No reverse engineering of this product is allowed.


Report this product

Sign in to report this app to Microsoft