IP CAM Controller

IP CAM Controller

Jerry Huang
$4.99 +
+Contains in-app purchases
May require certain hardware. See System Requirements for details.
+Contains in-app purchases
May require certain hardware. See System Requirements for details.
$4.99 +

Screenshots

Description

IP CAM Controller gives you a direct and simple way to control your IP camera from your mobile device. Simply “Tap to Center” (tapping an area of interest on your screen) or turn on “Sensor Mode” (tilting the mobile device in the desired direction) to change the angle and adjust the camera’s view as you wish! Pin specific cameras, angles, and views – and monitor multiple cameras at once with live tile support. Audio support is available for the following brands: AirLink, Astak Mole, Axis, Canon, ComPro, D-Link, EasyN, Foscam, Ipux, IP Webcam, Level One, LogiLink WC0008A, Maygion, Panasonic, Tenvis IPRobot3, Toshiba, TP-Link, TRENDNet, VivoTek, WansView, Y-Cam, Yudor Here’s a partial list of supported camera brands: ABUS, ACTi, AirLink, Apexis, Arecont, Astak Mole, Axis, AVTECH, Blue Iris, BOSCH, Brickcom, Canon, Channel Vision, COMPRO, Cytech, Dericam, D-Link, Eagle Eye, EasyN, Edimax, Excelon, Foscam, GeoVision, Grandstream, Grantec, iCatch, Instar, Ipux, IPX, JVC, Kaicong, KGuard, Level One, LinkSys, LogiLink, Lorex, Marmitek, Maygion, MIPS, Mobotix, Motion Webcam, Nuvico, Panasonic, Rayvision, SecuritySpy, Sharx, SmartHome, Solwise, Sony, Storage Options, SYAC, Tenvis, Toshiba, TP-Link, TRENDnet, TriVision, Vilar, Vitek, VivoTek, Vstarcam, WansView, WebcamXP/Webcam7, X10, Yudor, Y-Cam, 7Links Visit JerryHuang.net for full list. If your camera is not supported, please contact us at: http://JerryHuang.net * Buying the app will remove all advertising permanently. Unlimited audio for camera needs to be purchased separately.

Available on

HoloLens

PC

Mobile device

What's new in this version

v10.1.33 - now you can watch an advertising video to unlock full paid features in single view for once v10.1.32 - new camera support: Dahua, Cantonk v10.1.31 - Remember control panel show/hide state - SSL ignore invalid root CA v10.1.30 - Amcrest update due to firmware has breaking changes v10.1.29 - New camera support: ReoLink - IR support for Wanscam v10.1.28 - Continue to fix app crash/hang-up on phone devices v10.1.27 - Fixed app crash/hang-up after installing Windows Creator Update v10.1.26 - Full SSL support: Now supports both real and self-signed certification v10.1.25 - New camera support: Mobotix M1 v10.1.24 - New camera support: Toguard v10.1.23 - Russian language updated v10.1.22 - Language update: Supports Polish; French language package updated - Fixed Amcrest compatibility issue v10.1.21 - New camera support: Zoneway v10.1.20 - Better support for Amcrest - New camera support: Midas-Link - Motion detection enhancements: Alarm not triggered when moving camera; UI changes v10.1.19 - TRENDNet 311 PTZ support

Features

  • Live tiles support: View cameras in various tile sizes – pinned directly to the screen for fast access.
  • Tap to center (TTC): Adjust the camera to the position you tap on your screen.
  • Audio support: Listen to audio feeds of supported cameras.
  • Multi view: Monitor unlimited multiple cameras on one screen in portrait and landscape view.
  • Save for later: Record video or save a snapshot to your video library during viewing.
  • Backup: Save and restore camera configurations to and from Microsoft OneDrive
  • Motion detect: Set up motion detection and notify your device.
  • Link share: Grant access to others via link or email.
  • Sensor mode: Tilt your mobile device to adjust camera position.

System Requirements

Minimum
Your device must meet all minimum requirements to open this product
Requirement name Requirement detail
OS Windows 10, Windows 8.1, Windows 10 Mobile, Windows Phone 8.1, Windows Phone 8
Architecture ARM, x86, x64
Notes
Recommended
Your device should meet these requirements for the best experience
Requirement name Requirement detail
OS Windows 10, Windows 8.1, Windows 10 Mobile, Windows Phone 8.1, Windows Phone 8
Architecture ARM, x86, x64
Notes

Additional information

Published by

Jerry Huang
JerryHuang.net

Release date

3/16/2011

Approximate size

37.12 MB

Category

Photo & video

Age rating


This app can

Use your microphone
Access your Internet connection
Access your home or work networks
Use your pictures library
Use your video library

In-app purchases

Price range: $2.99 to $3.99

Installation

Get this app while signed in to your Microsoft account and install on up to ten Windows 10 devices.

Accessibility

The product developer believes this product meets accessibility requirements, making it easier for everyone to use.

Language supported

English (United States)
Dansk (Danmark)
Deutsch (Deutschland)
Español (España, Alfabetización Internacional)
Suomi (Suomi)
Français (France)
עברית (ישראל)
Magyar (Magyarország)
Italiano (Italia)
Lietuvių (Lietuva)
Bahasa Melayu (Malaysia)
Norsk, Bokmål (Norge)
Nederlands (Nederland)
Polski (Polska)
Română (România)
Русский (Россия)
Svenska (Sverige)
Tiếng Việt (Việt Nam)
中文(中华人民共和国)
中文(香港特別行政區)
中文(台灣)


Additional terms

IP CAM Controller privacy policy
IP CAM Controller license terms
Published by Jerry Huang JerryHuang.net
Terms of transaction


Report this product

Sign in to report this app to Microsoft

Name:

Type: onestore-filtersdropdown

Use STORE APP to preview

Ratings and reviews

To rate and review, sign in.