Este app tem uma avaliação gratuita

R$7,45
Visão geral Requisitos do sistema Opiniões Relacionado

Descrição

Welcome to the myCamera application! The myCamera will help you monitor and control MULTIPLE external FOSCAM MJPEG IP Cameras. The application is designed to interface to external FOSCAM MJPEG IP Cameras, that should be available on your local WiFi network or remotely on the internet (using MYFOSCAM.ORG). For each camera, the user can specify the IP Address, Port Number, Password & User Name and the Camera Model (through the Settings Charm). The myCamera will monitor Sound and Motion Alarms signals from the cameras. The application can Automatically record video when Sound and/or Motion are triggered (user selection). The myCamera will not play sound. The cameras can be operated on the local WiFi network or remotely over the Internet. Make sure to follow these steps: 0. Follow the steps outlined in the FOSCAM manual and set the Camera and the Router 1. Find / Set the Local IP Address and Port number of each camera in your WiFi network 2. Find / Set the User Name, Password for the cameras 3. If interested in remote viewing, Find / Set the DDNS Domain Name of the cameras (on the bottom of the camera body) 4. Identify the Camera Model. 5. Start the myCamera application and activate the Settings Charm (<WINKEY> + I) 6. In the Settings Charm, select the Camera Settings 7. Set the Camera IP address and Port number 8. Set the DDNS Domain Name 9. Set the User Name & Password 10. Select the Local / Remote camera operation 11. Set the Model of the Camera 12. Press the Save button 13. Repeat steps 6-12 for each camera. 14. Press the Refresh button of the myCamera application. 15. The setup is complete and the Camera Page should display the camera video 16. If the camera video is not displayed, try to Reboot the Camera 17. The camera should be ready in about 70 seconds 18. Wait for the camera to complete reboot and then start the myCamera application When switching the camera from one mode to another, I found out that a camera Refresh might be required. Sound/Motion Alarm: Alarm is marked with a RED border around the video image. A test camera was set for you to test your setting. In Camera Setting Page please follow these steps: 1. Set Remote DDNS Domain to: ah7898 2. Select the Remote camera operation 3. Set User Name to: TEST (Case Sensitive) 4. Leave the Password empty 5. As an Operator user, you will not be able to fully operate all the commands on the TEST camera If you have a problem connecting with the camera, please contact us: ytdassoc@gmail.com All data you enter using this application is kept locally only, on your device!

Capturas de tela

Informações adicionais

Publicado por

YASIG

Direitos autorais

YASIG Engineering

Desenvolvido por

YASIG

Data de lançamento

22/01/2013

Tamanho aproximado

1,15 MB

Classificação etária

Para todas as idades

Categoria

Segurança

Este app pode

Acessar a conexão com a Internet
Acessar a conexão com a Internet e atuar como servidor.
Acessar a rede doméstica ou corporativa
Usar sua biblioteca de vídeos

Instalação

Baixe este app enquanto estiver conectado em sua conta da Microsoft e instale-o em até dez dispositivos Windows 10.

Idioma compatível

English (United States)

Informações do Fornecedor

Site do myCamera
Suporte do myCamera

Termos adicionais

Política de privacidade de myCamera
Termos da transação
Termos de licença de myCamera
No reverse engineering of this product is allowed.

Denunciar este produto

Entrar para informar sobre este aplicativo à Microsoft